DBW pedal mounting bracket
 

I did an LS3 (Gen IV motor) installation in my 1968 C10 a while back. When I got to the point of mounting the DBW pedal, I fabbed up this pedal bracket that bolts to the firewall where the factory pedal used to mount. The bracket is made out of 1/4" steel and has the holes punched in them for ease of installation.

It is set up to use a 2005+ Corvette DBW pedal (GM Part # 25835421) that can be purchased on Ebay for around $50-75. The color code of the Corvette pedal is the same as the Gen IV truck DBW pedal, you just have to swap 2 wires (I'll look those up and post). The nice part about the Corvette pedal, is that the pad is exactly identical to the gas pedal pad in the 71-72 trucks. This allows you can to use the factory stainless trim on it giving you a clean factory look. The pedal bracket is $50 shipped. If you have any questions let me know.

Rob

**************
GEN III truck pedal brackets can be found here: http://67-72chevytrucks.com/vboard/s...d.php?t=651123
**************

Re: DBW pedal mounting bracket
 

Does the pedal arm bottom out on the floorboard at wot? What's your paypal?

Re: DBW pedal mounting bracket
 

No interference. It is placed to get full throw on the pedal. PM sent.

Re: DBW pedal mounting bracket
 

Thanks for the info and all your help. PM replied

Re: DBW pedal mounting bracket
 

Whats the part number on that corvette pedal?

Re: DBW pedal mounting bracket
 

I would like one of these brackets. Can you send me your paypal Info.


Also interested in the Corvette pedal p/n if anyone has it.

Re: DBW pedal mounting bracket
 

25835421

25835421

I added the part number to the my first post.

Paypal is robhartley@aol.com. I pick up a new batch early next week, so it will be toward the end of next week before I ship it out. Thanks,

Rob

Re: DBW pedal mounting bracket
 

That will work fine for me. Paypal payment sent.

Re: DBW pedal mounting bracket
 

So you only have to switch 2 wires to run this on a 04 5.3 motor?

Re: DBW pedal mounting bracket
 

Thanks!

If you want to use the Corvette pedal. Post a picture of your DBW plug.

Re: DBW pedal mounting bracket
 

I don't have my pedal yet. I have an 04 5.3. Just trying to plan this out and the pedal you have is the best pedal I have seen so far.

Re: DBW pedal mounting bracket
 

I already have an 04 truck pedal. Will this bracket work

Re: DBW pedal mounting bracket
 

Can you post a picture of your pedal and the connector?

Re: DBW pedal mounting bracket
 

I'm pretty sure the Corvette pedal will work, but I haven't tried it. Maybe do a little research on LS1Tech and see what you can find. I'll look also.

As is, if you mount the truck pedal to the bracket, I think it will push the pedal to far towards the driver. I'm going to do some more prototyping with the truck pedal to see what I can come up with.

Steve - you pedal bracket will be shipped USPS today. Thanks,

Re: DBW pedal mounting bracket
 

Another picture of the setup.

Re: DBW pedal mounting bracket
 

Good Deal!


Thanks!!!

Re: DBW pedal mounting bracket
 

I ordered one of these and it arrived promptly... Its a very nice heavy duty piece... plan on installing it with the vette pedal assembly this week

Re: DBW pedal mounting bracket
 

do you have a bracket for the 73 up ? I got a 77 with a 6.0 dbw pedal mine sets to high

Re: DBW pedal mounting bracket
 

Thanks!

Thank you!

Can you post pictures of where the pedal would mount?

Re: DBW pedal mounting bracket
 

my pedal is even with the brake pedal and its a truck pedal with no sweivel my foot gets tired here are a couple fuzzy pics I used the factory 2500hd pedal mount I just lowered it a little and drilled new holes

Re: DBW pedal mounting bracket
 

Thanks for the pics. I'm going to have to find a local truck and do some measuring.

Re: DBW pedal mounting bracket
 

Hey Hart Rod,
Was busy and didn't get a chance to take a pic of my 86' and now im out of town. I hope these work for the square body trucks!! Looking forward to your findings!

Re: DBW pedal mounting bracket
 

Hart rod,
Do you happen to have a link to the info for repinning the DBW plug so I can use the vette pedal?

I am about ready to dive into this part of the project. I have looked on here and Ls1tech and was not able to find anything.

Re: DBW pedal mounting bracket
 

I think they will but I just got back from a week long mission trip to Haiti, so I haven't had time to dig more into it. Hopefully this week or next.

I will try to get some pictures taken today or tomorrow to show the difference. Bump this to the top if I haven't by tomorrow evening.

Re: DBW pedal mounting bracket
 

Bump