72 Blazer 2.0
 

So my first truck was a 72 Blazer when I was 16 so 34 years later I had urge find another one and restore it. So this is what I have going on.
Attachment 1616539 I started to disassemble it at the beginning of November 16
Attachment 1616542

Attachment 1616543

Attachment 1616549

Attachment 1616555

Re: 72 Blazer 2.0
 

Here's about where I'm at now

Re: 72 Blazer 2.0
 

looks awesome. I am at almost the identical stage. What did you use for a tank?
custom bend fuel and brake lines or buy pre bent?

Re: 72 Blazer 2.0
 

subscribed

Re: 72 Blazer 2.0
 

Thats the Blazer I bought in Tennessee on a saturday afternoon. Popped up on clist
And was on 18 mins when i saw it. That was the best K5 body ive ever seen. I sold it to
A buddy in Easley sc and he put it on Ebay.. Glad its getting the restoration
It. deserves. Its actually the twin to mine.

Re: 72 Blazer 2.0
 

It the same tank that it came with it I just painted it(I think it a older aftermarket tank). All the lines I brought from Inline tube and they fit perfect.

Re: 72 Blazer 2.0
 

That's the one! I saw how clean it was and had to have it. The only real rust I had to fix was the right side rocker ( I can post up some more pictures later)

Re: 72 Blazer 2.0
 

What a great truck. Thank you for posting the restore pictures.

Re: 72 Blazer 2.0
 

A little out of order but here is the pictures of the rust repair. Its just amazing how clean this truck's sheet medal is.

Re: 72 Blazer 2.0
 

^^^How do I fix these pictures I can't get them to post the right side up:banghead::banghead:

Re: 72 Blazer 2.0
 

If you have paint just open them in paint and use the rotate function. LOL

Re: 72 Blazer 2.0
 

Here I did one for you

Re: 72 Blazer 2.0
 

OMG I'll try it

Re: 72 Blazer 2.0
 

I think I got my posting pictures problem figured out. So lets see if I can throw up some pictures the right way. The first picture of underside is after scraping, wire wheeling and sanding for 3 days then epoxy DP primer and 2 coats of Sem rust and shield with hardner. It came out real nice the pictures doesn't do it any Justice. The next few pictures of the chassis waiting for parts and the last picture is this really cool roll bar that came with a parts truck I picked up.

Re: 72 Blazer 2.0
 

Got the backing plates back from the Plater
Attachment 1623021
New custom4" springs from ORD
Attachment 1623022
Ready to install new body bushings from Wes at Hartbeat and lower the body
Attachment 1623023
Ready to go to paint
Attachment 1623024
Now its time to put the engine together, its the original 010 block stuffed with stroker crank, roller cam and bunch of other goodies. More on later
Attachment 1623025

Re: 72 Blazer 2.0
 

Looks awesome! I wish I would have thought of plating my backing plates!

Re: 72 Blazer 2.0
 

I'm in. Looks great so far. You've motivated me to make a run to the plater and powdercoat shops today.

Re: 72 Blazer 2.0
 

That looks like a smitty built roll bar. I like it better than the dealer install one. I wish I could find one not too far from me.

Re: 72 Blazer 2.0
 

Thanks for the info on the roll bar I knew it was old school but didn't knew who made it. I thought it might of been dealer installed but I'm guessing its not now.

Re: 72 Blazer 2.0
 

I',ve got a roll bar same deal came in my truck.Dont know if I will put it back in yet.Did you get new clamps with your inline tube in there kit, I'm fixin to order there stuff soon.Nice truck,getten one back together as well.

Re: 72 Blazer 2.0
 

I did order the clamps just in case but they didn't compare to the originals and mine were still in good shape so I glass beaded and painted them the original colors. The different colors on the clamps means how many lines it holds and the size of the lines.

Re: 72 Blazer 2.0
 

Saved the ones on this truck as well,most likely will clean up and do the same. Thanks. Paul.

Re: 72 Blazer 2.0
 

Subscribed

Re: 72 Blazer 2.0
 

I've been busy working on this thing and haven't posted anything lately but I made some nice progress so here is what we have.Attachment 1630037
All prepped and ready to go the body shop and these two pictures are from 2 1/2 weeks ago
Attachment 1630039
So while the truck at the body shop I started putting the engine together, I started with the original block and heads then adding a steel stroker crank, good rods, forged pistons and a comp roller cam.

Re: 72 Blazer 2.0
 

Here are some more engine assembly pictures Attachment 1630053

Attachment 1630054

Attachment 1630055

Attachment 1630056

Attachment 1630057