60-62 Frame Horns
 

Common problem with them cracking and breaking.
I had hoped to replace them with the 63-66 style, but it's not just about the bolt spacing, the 60-62 bumper contour is different than the 63-66.
I know I could find someone who has a nicer set they could cut off an old frame, but I'd like to see if we could come up with another solution. Has anyone fabricated their own new horns?

Re: 60-62 Frame Horns
 

I actually made it this far before I realized the shape of the bumpers are different. I knew the bolt spacing was different, but I didn't realize the shape of the bumpers on 63-66 were different from the 60-62.
http://i1106.photobucket.com/albums/...psyy8ckixr.jpg

Re: 60-62 Frame Horns
 

You've gone that far, why not just find a 63-66 bumper to fit the new horns? Or am I missing something?

Re: 60-62 Frame Horns
 

They're not welded yet. Just hanging there for mock up.
Yes, I've considered getting a 63-66 Chrome Bumper.
I've got one more thing I'm going to try.
I would rather not spend $180.

Re: 60-62 Frame Horns
 

Isn't the 63-66 frame taller here ? Might interfere with the grille surround . The notches in the surround for 63-66 are taller or deeper than 60-62.

Re: 60-62 Frame Horns
 

yes, my grill support happens to be from a 65. my 65 is on a 62 frame.

Re: 60-62 Frame Horns
 

I'll chalk it up to another lesson learned.
No big deal. I went ahead and repaired the 62 horns.
I'm comfortable with my welding skills.
I'll just weld them back on. :(

Re: 60-62 Frame Horns
 

My front frame horns are shot too so if anyone has '60-'62 horns or another solution, please reply.

Re: 60-62 Frame Horns
 

I cut mine off. Bolted the broken pieces to the bumper. Tack welded the pieces together. Then welded the repaired horns back on.
http://i1106.photobucket.com/albums/...psbsqvv746.jpg

Re: 60-62 Frame Horns
 

I would weld in some gussets to keep it from happening again.

Re: 60-62 Frame Horns
 

Saving ron's post for future reference:

Re: 60-62 Frame Horns
 

I am in the same predicament. I currently have a set of frame horns from a 63-66. If I welded those on to my 60 Chevy would I just have to use the 63 to 66 bumper?

Re: 60-62 Frame Horns
 

Yes

Re: 60-62 Frame Horns
 

Yes, I just want to do few more alignment checks before I reinforce them.

Re: 60-62 Frame Horns
 

It's almost like there should be a reinforcement piece that could be fabricated to bolt to the existing frame. That way even those without the ability to weld could just bolt it up.