Bench Seat Options
I have a 69 Short Fleet missing the bench seat - I’d like to see some pictures of later seats and what they came from to help with decision about which one to use.
|
Re: Bench Seat Options
1 Attachment(s)
Here is mine. I just finished installing a couple of weeks ago. Have to figure out a good angle for the “in truck” pic. Brand new seat from shop4seats.com. Direct bolt in.
|
Re: Bench Seat Options
Do a search on here ,about 10 different post on this.
|
Re: Bench Seat Options
Quote:
|
Re: Bench Seat Options
Quote:
How do you like them so far Matt? Nice looking seats. Surprised you went with one color? Did you not want to do the insert a different color? Is that black or charcoal? |
Re: Bench Seat Options
1 Attachment(s)
The inside of my cab is blue. The 2 different blues they offered were not close and I didn't want a 3rd color. I am going with black and blue now for the interior. Leaving all the steel blue. Going to dye my vinyl door panels black, they are pretty whomped on anyways. need to get a new steering wheel so I figure, chrome or stainless with black grip.
|
Re: Bench Seat Options
Beautifully done Matt!
|
Re: Bench Seat Options
Personally looking for a bench out of an early 90's truck - the backs are thinner so you can gain a little leg room.
|
Re: Bench Seat Options
Quote:
|
Re: Bench Seat Options
Matt, seat looks great in your truck. How are they comfort wise? I am thinking about placing an order.
|
1 Attachment(s)
I used a bench seat out of a '93 Silverado, and cut the mounts to drop it two inches and angle it back slightly. I'm 6'6", so I need the clearance. It is really comfortable, and fits the truck very well.
Posted via Mobile Device |
Re: Bench Seat Options
Quote:
|
Re: Bench Seat Options
Quote:
|
Re: Bench Seat Options
MattG I sent you a pm.
|
Re: Bench Seat Options
Quote:
|
Re: Bench Seat Options
My truck was originally a bench seat truck. I replaced the factory bench seat with this one. It was direct bolt in as long as you order the proper bracket/adapters for your make model and series(years). The 3 seats bolt to the rectangular frame that bolts to the brackets that use 4 of your original 8 factory threaded holes in the cab floor.
|
Re: Bench Seat Options
1 Attachment(s)
I used a 2010 Silverado manual seat. it has storage under the center base, three cup holders, and the storage inside the center seat back. I did have to move the gas tank out of the cab. And you do sit higher. I'm 5'10" and don't hit the ceiling though.
|
Re: Bench Seat Options
Quote:
|
Re: Bench Seat Options
1 Attachment(s)
Mine are just sitting in the cab for now, plan to modify brackets, but the early 90's seat fits great. Lots of leg room. Picked it up on FB marketplace for $125.
|
Re: Bench Seat Options
Quote:
|
Re: Bench Seat Options
Quote:
|
Re: Bench Seat Options
3 Attachment(s)
Here's how my seats turned out.
|
Re: Bench Seat Options
My seat sits higher or maybe just firmer as the old bench seat was pretty worn out and broken down. But it feels good. Your seats look great. Nice color combo. Looks like they match your interior pretty well.
|
Re: Bench Seat Options
I just installed my shop4seats seat as well. mine seem to set very high. I'm going to cut the bracket down and reinstall.
|
Re: Bench Seat Options
Quote:
|
All times are GMT -4. The time now is 03:22 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com