The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Heavy Haulers (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=239)
-   -   60'ish C60 in junkyard (https://67-72chevytrucks.com/vboard/showthread.php?t=504246)

sigshooter 01-18-2012 10:49 PM

60'ish C60 in junkyard
 
2 Attachment(s)
This came in today, I think it is a 60 because it has cables for the lower inside vents. Is the anything I should pull off this before it gets crushed? the doors are rusty in the lower corners as usual, no chrome dash knobs... does have a 4 lever heat defrost control panel.

anyways, any demand for these type grilles? did the 2 tons have anything desierable?

hewlett2002000 01-19-2012 12:22 AM

Re: 60'ish C60 in junkyard
 
I sure would like to have that grille, or one like it. nice find.
John

porter90 01-19-2012 12:36 AM

Re: 60'ish C60 in junkyard
 
i actually found one of these in a junk yard here too...is that grill a c60 thing only? an im pretty sure that is a c60 because the one here looks exactly like it an still has the badges on it

Captainfab 01-19-2012 03:02 AM

Re: 60'ish C60 in junkyard
 
I would definitely pull the grill, and the complete heater assembly if you can. Does the gauge panel have a tach or vacuum gauge? What engine does it have? Power steering? Does it happen to have the rare independent front suspension?

duallyjams 01-19-2012 08:51 AM

Re: 60'ish C60 in junkyard
 
The hood looks good.

Rich 5150 69 01-19-2012 09:16 AM

Re: 60'ish C60 in junkyard
 
Wiper arm assemblys and motor/switch if they are original..window and door latch assemblys too for resale

sigshooter 01-19-2012 09:26 AM

Re: 60'ish C60 in junkyard
 
Quote:

Originally Posted by Captainfab (Post 5132465)
I would definitely pull the grill, and the complete heater assembly if you can. Does the gauge panel have a tach or vacuum gauge? What engine does it have? Power steering? Does it happen to have the rare independent front suspension?

No tach or vac gauge, has a newer looking v8 no power anything and I will have to look at the front suspension

1963c-10 01-19-2012 09:37 AM

Re: 60'ish C60 in junkyard
 
The cab lights are starting to get harder to find...some one will probably want them.

awbrown 01-19-2012 09:59 AM

Re: 60'ish C60 in junkyard
 
If the cab is solid then it is a great find !! My cab on my blue truck is from a C60 ...

Narxoleptic Customs 01-19-2012 12:07 PM

Re: 60'ish C60 in junkyard
 
I wish I had the $$ to throw at u for the grill. I'd come get it today. Keep the grill, cab lights, handles and steering wheel
Posted via Mobile Device

aerotruk63 01-19-2012 01:14 PM

Re: 60'ish C60 in junkyard
 
jonzcustomshop had been looking for the front tips of the medium duty fenders for his project. I went to look for some I had, but to no avail.

sigshooter 01-19-2012 09:54 PM

Re: 60'ish C60 in junkyard
 
Quote:

Originally Posted by sigshooter (Post 5132629)
No tach or vac gauge, has a newer looking v8 no power anything and I will have to look at the front suspension


It does have independent front suspension, I will take pics tomorrow my phone died today so no camera =-(

awbrown 01-19-2012 09:56 PM

Re: 60'ish C60 in junkyard
 
looks like a 63 ,but you better see what the vin number says ....

94tx 01-19-2012 11:16 PM

Re: 60'ish C60 in junkyard
 
I am interested in any parts that are interchangeable with C-10s. Please PM me an email or phone number, I will buy anything that hasn't been spoken for.

aerotruk63 01-20-2012 04:39 PM

Re: 60'ish C60 in junkyard
 
Fenders 60-62, hood 62+. grille 60-61

Hawks 01-20-2012 08:30 PM

Re: 60'ish C60 in junkyard
 
I would Keep the windshield if it is in good shape. it should fit c10s. i could use it myself.

sigshooter 01-20-2012 09:23 PM

Re: 60'ish C60 in junkyard
 
2 Attachment(s)
Quote:

Originally Posted by sigshooter (Post 5133849)
It does have independent front suspension, I will take pics tomorrow my phone died today so no camera =-(

here are some more pics

jonzcustomshop 01-20-2012 10:48 PM

Re: 60'ish C60 in junkyard
 
Here is the piece of the rf fender i am looking for.:
http://67-72chevytrucks.com/vboard/s...d.php?t=458028
post #7 shows the measurements...

the grille is a 61, I would save it.

sigshooter 01-20-2012 11:01 PM

Re: 60'ish C60 in junkyard
 
Quote:

Originally Posted by jonzcustomshop (Post 5135795)
Here is the piece of the rf fender i am looking for.:
http://67-72chevytrucks.com/vboard/s...d.php?t=458028
post #7 shows the measurements...

the grille is a 61, I would save it.

I will look the fender over closely for rust and damage and get back to you


All times are GMT -4. The time now is 12:56 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com