The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=12)
-   -   Desparately looking for this seat.... (https://67-72chevytrucks.com/vboard/showthread.php?t=756275)

atm70chevy 02-03-2018 12:50 PM

Desparately looking for this seat....
 
I have been searching high and low for a 1995-1998 bench seat with the bucket backs and fold down console. An example of the seat is post #48 on this thread : Re: show photos of your bench seats. Anybody know where one might be for sale? I have checked all salvage yards in my area and haven't had any luck on Craigs list or Ebay either....

Thanks for any help and suggestions yall may have.

harpo231 02-03-2018 02:12 PM

Re: Desparately looking for this seat....
 
302-422-7584

If they don't have,,, they will utilize a hotline to all yards on the east coast...:chevy:

notsolo 02-03-2018 02:44 PM

Re: Desparately looking for this seat....
 
re-post your link#48, I got drivers side seat belt out of a 96, split bench..A week ago Donavan's Salvage in Georgetown, De 19947.....YourBest bet is to call your local guy's once a week, anything decent goes quick you have to be right on top of it to find a decent seat.....Good Luck

roboticjunky 02-04-2018 05:09 PM

Re: Desparately looking for this seat....
 
Quote:

Originally Posted by atm70chevy (Post 8177144)
I have been searching high and low for a 1995-1998 bench seat with the bucket backs and fold down console. An example of the seat is post #48 on this thread : Re: show photos of your bench seats. Anybody know where one might be for sale? I have checked all salvage yards in my area and haven't had any luck on Craigs list or Ebay either....

Thanks for any help and suggestions yall may have.

If you look farther down the thread, you'll see this.

"Quote: Originally Posted by GCncsuHD View Post
Looks like a bench out of a 95-98 GM truck, just cut down, reshaped, and with some nice stitching.

Quote: That's exactly what it is! "

Check car-parts.com to search junkyards.

95 S_Trucker 02-04-2018 06:07 PM

Re: Desparately looking for this seat....
 
1 Attachment(s)
Here's a pic of the seat you are looking for:

Attachment 1747631

They are not as common as the 60/40 split bench. You can look in regular cab trucks from 95-98(00 for 3/4 and 1 ton). You can also look in the rear of a crew cab from 95-00.

My 99 crew cab had a seat like that in the back. And my 96 c3500hd reg cab has one in it too.

Most 95/96 trucks just have a fold down armrest without storage. Most 96+ have the fold down armrest with storage inside. They are interchangeable. You can put an armrest with storage where there was an armrest without storage.


There is no cutting, shaping or anything needed. They came like this from the factory.

b454rat 02-04-2018 09:10 PM

Re: Desparately looking for this seat....
 
I had two crews that had that rear seat....

Tom 02-05-2018 08:07 PM

Re: Desparately looking for this seat....
 
My 98 has that but for the front seat.

Jeepwm69 02-06-2018 12:45 PM

Re: Desparately looking for this seat....
 
There's a junkyard in Bald Knob AR that posted a 60/40 grey bench like that a couple of days ago. I know it's not the full bench as pictured, but looks the same once you get it in.


All times are GMT -4. The time now is 12:55 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com