1966 C10 Part Out
5 Attachment(s)
Have a 66 c10 that’s up next for a part out. Not a whole lot left of the cab, one rocker is missing completely and someone cut the living day lights out of the transmission tunnel to get the motor and tranny out of it. Nonetheless here it is for parts or if someone wants to buy it whole that’s fine too. Can get better pictures of the stuff upon request. All prices are obo
Gauge cluster in good shape w/ harness- 75 plus shipping Glovebox door- 45 plus shipping Ash tray- 10 plus shipping Steering wheel with horn cap- 65 plus shipping In bed spare tire holder (need to double check condition of bottom mounts)-100 shipped Mirrors(not sure on exact style name) 100 plus shipping Any other odds and ends or other parts just post I’ll see what I’ve got. As you can tell by the one picture there’s several sources of parts |
Re: 1966 C10 Part Out
5 Attachment(s)
Few more
|
Re: 1966 C10 Part Out
66 3/4 ton rear springs?
|
Re: 1966 C10 Part Out
Are they any different than a 65?
|
Re: 1966 C10 Part Out
should be the same can you measure the coil diameter and send a picture ? Thanks
|
Re: 1966 C10 Part Out
Yes it’ll be a few days before I’m back down there so bare with me
|
Re: 1966 C10 Part Out
No problem
|
Re: 1966 C10 Part Out
hub caps available?
|
Re: 1966 C10 Part Out
Drivers door , three holes for mirror that have factory screws in them, when not used for a mirror. Would like the three screws if their, in useable condition.
Thanks, Les |
Re: 1966 C10 Part Out
Quote:
|
Re: 1966 C10 Part Out
Quote:
|
Re: 1966 C10 Part Out
What size are the wheels?
|
Re: 1966 C10 Part Out
Do you have any round backup lights? Thanks shipping to 93654. Jim
|
Re: 1966 C10 Part Out
15” wheels, and I should have some backup lights
|
Re: 1966 C10 Part Out
Thanks, how much 4 the hub cap set shipped to 08753?
|
Re: 1966 C10 Part Out
Looking for a knob (60-63 chev or 60-66 GMC) for wipers/washer switch, and a wiper motor with washers, ideally 60-62(?). Also, need a cut from a stepside fender, the back 10" or so of driver's side.
|
Re: 1966 C10 Part Out
Quote:
|
Re: 1966 C10 Part Out
How much for the in-bed spare mount if the bottom mounting flange is not all rotted off from being under all that dirt
|
Re: 1966 C10 Part Out
PM me a price shipped to 31406 for the instrument cluster. I think it is gauges not lights? Thanks
|
Re: 1966 C10 Part Out
I'm interested in the headlight bezels if available.
|
Re: 1966 C10 Part Out
I will be going out there, at the latest, this weekend so I’ll get pictures of what I got f the requests
|
Re: 1966 C10 Part Out
Second in line for the hub caps
|
Re: 1966 C10 Part Out
Radio? Speaker? I'd like to get in line for the hubcaps also.
|
Re: 1966 C10 Part Out
How's the kick panel around the dimmer switch?
|
Re: 1966 C10 Part Out
Hubcaps I would like to have 125 plus shipping. They have some dings and not perfect by any means but a nice patina style.
Pdxhall- bezels are available, they have some dents and such but if you’re still needing a set I have several. Sirjim- I have the outer chrome bezels but no lenses anymore. Let me know if you’re still interested Aotte- I have those screws still in doors, if I can get them out without tearing the up too bad I’ll give them to you. Vetnat- did you need chrome or black on the wiper knob? Rollthedice-I’ll get a quote for you. Jdl-let me see what I’ve got |
All times are GMT -4. The time now is 02:45 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com