Wheel wells for 67-72
 

Check out these wheel wells for a slammed 67-72. They are in the process of being made from fiberglass and the first ones will be ready for sale in a month. Both front and rear wheel wells look like a factory GM set, but raised enough to make a low stance. The blazer below is at ride height and has lots of suspension travel! I have been surfing this site for years and enjoy the information and vendors I have found. When these become available I'm going to become a vender on this site. I welcome any feed back you might have.

Re: Wheel wells for 67-72
 

I want a set of those front ones! Please keep us informed as to your progress:)
Posted via Mobile Device

Re: Wheel wells for 67-72
 

any future plans for the 73-87 chevy trucks??

Re: Wheel wells for 67-72
 

I'm happy to see you guys on here all of your trucks are amazing.67-72 and 73-87 parts will sell easy on here good luck hope to see parts from you.

Re: Wheel wells for 67-72
 

can you the stock hood hinge with the front inners?

Re: Wheel wells for 67-72
 

My first instinct is 'no'. There's maybe an inch clearance with stock tubs, looks like these are more than that.

Man, when it rains, it pours. These will be cool. Should be able to build a completely bolt-on, frame-laying show truck soon...
Posted via Mobile Device

Re: Wheel wells for 67-72
 

This is the truck with the 'touring' dropmember, correct? So, these will clear the upper a-arms and steering shaft? If so, cool :cool:
Posted via Mobile Device

Re: Wheel wells for 67-72
 

these wheel wells will not work with stock hood hinges. I am using the hinges in the cowl from porterbuilt street rods. I set the front up with the drop member from them to. The wheel wells cover the upper control arms and mounts for a clean look.
Posted via Mobile Device

Re: Wheel wells for 67-72
 

awesome!!! how much are the fronts gonna be? also whats the biggest diameter tire you can use to still lay frame? Thanks

Re: Wheel wells for 67-72
 

X2
Posted via Mobile Device

Re: Wheel wells for 67-72
 

it was worth a shot!!! j/k

Re: Wheel wells for 67-72
 

interested??? Prices?

Re: Wheel wells for 67-72
 

wasn't a member working on this exact thing just a few weeks ago? is this a joint deal or something brand new?

Re: Wheel wells for 67-72
 

67cheby?

i think he made a set too, not sure if its this same one though...they sure do look cool though

Re: Wheel wells for 67-72
 

Hey guys I have seen these wheel wells in person, these pictures do them no justice. They look like they are factory wheel wells but will allow you to lay out. Also that blazer in the above pic is at ride height.
Posted via Mobile Device

Re: Wheel wells for 67-72
 

no this is not a group effort, not the same as mine

Re: Wheel wells for 67-72
 

What on the firewall and fenders needs to be modified to make these fit?

Re: Wheel wells for 67-72
 

^^ also interested in this

Re: Wheel wells for 67-72
 

The firewall does not need any modification,they bolt in to the stock mount on the firewall. The fenders need to be trimmed to the new wheel well opening, and the outside flange needs to be rolled up for more tire clearance. I made a sheet metal piece to fit the top of the wheel wells that is welded to the fender and has additional bolts to help secure the top of the well, like the stock ones. The two bolts are screwed from the bottom and are not seen from the engine bay. More pictures will follow to help show what I'm talking about.

Re: Wheel wells for 67-72
 

how much?

Re: Wheel wells for 67-72
 

The front pair are going to run 750 and the rear will run 650. I'm going to sell front and rear with a discounted package deal. Also thinking of a group rate with discounts as well. I'm going to wait to take orders till the fiberglass ones are in my hand.

Re: Wheel wells for 67-72
 

I seen these in person. They look so true to the originals - as if laying frame was an option . . . . Just ordered mine (2 sets). Cant wait!! :four:

Re: Wheel wells for 67-72
 

Any new info?
Posted via Mobile Device

Re: Wheel wells for 67-72
 

are they available now? any more detailed pics?

Re: Wheel wells for 67-72
 

Anything new on these?