Need a favor
1 Attachment(s)
Does anyone have a 72 k10 frame that they could make a template at the rear of the frame where the bumper brackets bolt on. Mine has been torched out in several of the holes and I'd like to weld it back to the way it was from the factory. Maybe use a thin piece of cardboard from a pop or beer carton and cut it down to fit on the inside of the frame rail and trace all the holes on the outside. I would pay for the shipping.
|
Re: Need a favor
Or maybe someone can chime in and tell me what years are the same maybe in c10 vs k10,k20
|
Re: Need a favor
Anyone???
|
Re: Need a favor
I can probably make you a template but i won’t be able to until Saturday.
|
Re: Need a favor
P.m sent
|
Re: Need a favor
I have a 72 K20 frame. Let me know if I can help.
|
Re: Need a favor
1 Attachment(s)
Could you tell me if it looks like this without the torched holes.
|
Re: Need a favor
Not sure why it rotated on me.
|
Re: Need a favor
I can check tonight and post a pic.
|
Re: Need a favor
Quote:
|
Re: Need a favor
2 Attachment(s)
Looks like my rear-most holes have been elongated but here is what I have.... LH posted first. RH is second picture. Sorry that pictures aren't great--I have a lot of stuff on the frame. Let me know if you want a template.
|
All times are GMT -4. The time now is 07:19 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com