bagged and z'ed steering shaft
I'm looking to find the safest and best way to step my steering shaft. The front is z'ed 3 inches and I'm goin to bag it. Anybody have an good examples of what u joints to use and if you are removing the rag joint.
|
Re: bagged and z'ed steering shaft
I'll take a pic of mine and post it but I modified a stock astro van shaft to my 1 ton in my signature. Bare with me til tomorrow and ill post it up.
|
Re: bagged and z'ed steering shaft
Do you really need to? On my 68 i just notched the arm to clear the shaft
|
Re: bagged and z'ed steering shaft
Idk bout 1/2 ton cus my uppers are different.
|
Re: bagged and z'ed steering shaft
Quote:
|
Re: bagged and z'ed steering shaft
1 Attachment(s)
Best I got only reason the old rag joint is there is because the splines are different on the astro. Keep in mind this is a rat rod so in wasn't shooting for appearance but if u want it nice get some u joints from a race shop and some DD rod and build one
|
Re: bagged and z'ed steering shaft
1 Attachment(s)
Another
|
Re: bagged and z'ed steering shaft
Also it's bagged, z'd 4", and body dropped 4" so I had to notch as well
|
Re: bagged and z'ed steering shaft
1 Attachment(s)
I bought the borgeson joints and shaft for mine...
|
Re: bagged and z'ed steering shaft
Quote:
|
Re: bagged and z'ed steering shaft
Because it has an adjustable slide built in that allows you to modify the length when fitting
|
All times are GMT -4. The time now is 01:34 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com