The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   What did you get done 2.14.10 valentines day edition (https://67-72chevytrucks.com/vboard/showthread.php?t=386786)

old Rusty C10 02-14-2010 05:37 PM

What did you get done 2.14.10 valentines day edition
 
3 Attachment(s)
I didnt do anything with the 82 this week. I did take a ride up to Higganum Conneticut to buy seats to replace the ones in the S10 that the baby elephant sat on . As per every s10 ive ever seen i had to do the repair to the armrest (a writeup is one on the S10 forum) and then for valentines day i took the wife out for dinner last night and she bought me a radio for the s10 so i could listen to my country music, This week I have to get the wiring harness and the kit to put it in.
Last but of news is I got a new phone this week and im still trying to figure out these new contraptions its a my touch with web and all

How about you all???

Driveway Dreams 02-14-2010 05:50 PM

Re: What did you get done 2.14.10 valentines day edition
 
We have not done much. Just hanging out, watching Olympics and Nascar. Today we got the kids some balloons and rubber balls. Dang Valentine's day is easy for 1 & 4 year olds. I might do a little work on a couple truck parts if the race doesn't get started back up soon.

GMC91 02-14-2010 05:55 PM

Re: What did you get done 2.14.10 valentines day edition
 
Ive been doing a lot of wire brushing, sand-blasting, and painting. So far got the axle, axle shafts, and steering knuckles done for my 86 3/4 4x4.

trenchwarfare 02-14-2010 06:51 PM

Re: What did you get done 2.14.10 valentines day edition
 
I bought a new wiper switch that needs to be installed shortly. Also got some Max Air shocks that I painted today.

jawilder 02-14-2010 06:56 PM

Re: What did you get done 2.14.10 valentines day edition
 
For the 79 I just baught: Last night I took the running boards off

Today I took off the factory window tint and used coke/tin foil to clean rust off the front bumper. That stuff works like a charm!

I also WD40'd the hood springs and other hinges.

jitteryguy 02-14-2010 06:57 PM

Re: What did you get done 2.14.10 valentines day edition
 
been sit'n on the couch since 7:30 this morn'n ! dont plan to move till NHRA is over tonight . probably will sit here all day tomarrow as well .
life is good !

qu1cks1lver56 02-14-2010 07:52 PM

Re: What did you get done 2.14.10 valentines day edition
 
I attempted to spray the inside of my toolbox with bedliner. But 3/4 of the way through the first coat I ran out of it and the gun kept clogging. So I took it apart and it's sitting in some lacquer thinner now.

Srubydo1986 02-14-2010 07:56 PM

Re: What did you get done 2.14.10 valentines day edition
 
looked at all the snow and kept say melt will you, just melt. Looked at my truck covered in snow and got my self a sports bumper (from a blazer) after trading my blazer rears i had. Also bought a trans that thought to be a 350 turned out to be 700r4 (was not there to verify) o well ill make this work even tho i truly am afraid of theses transmissions

Sarge261 02-14-2010 08:46 PM

Re: What did you get done 2.14.10 valentines day edition
 
I got most of the rear of the cab DA'd down with 40, found out I need cab corners, took the wife out for a nice dinner, spent time with the puppy. had to open up the shop saturday for a few cusstomers.

Ready to start all over again in the morning... weekends just aint long enough.

Sarge

ShowSS12 02-14-2010 08:53 PM

Re: What did you get done 2.14.10 valentines day edition
 
Quote:

Originally Posted by qu1cks1lver56 (Post 3800903)
I attempted to spray the inside of my toolbox with bedliner. But 3/4 of the way through the first coat I ran out of it and the gun kept clogging. So I took it apart and it's sitting in some lacquer thinner now.

Ya them guns suck. I was doing a bed liner on my 85 and it kept clogging too..Since then I picked up the Al's line brand in my shop and I have been waiting to try it out. Their gun looks much nicer, sorta like a big hopper paint gun or a drywall texture.


This weekend I just went out to put out some hay for the cattle, and tried to finish up an 96 Impala I am working on in the shop.... Other than that kids and I hung out while momma was out..

RuralRoute C-30 02-14-2010 09:12 PM

Re: What did you get done 2.14.10 valentines day edition
 
Learned far too much about horns today.

Did find the faulty ground wire that had my fuel gauge pegged two inches past Full! Nice to have a fuel gauge now.

Took door panels off and worked on lubricating window tracks that were acting stuck when I tried to roll then down.(works great now)

Last but not least as the sun began falling and the shop started cooling down I managed to simply clean the floor of the interior of this "new" old truck and installed new floormats! I deserved an easy installation to end the day. :)

From this:http://i957.photobucket.com/albums/a...iorbestpic.jpg
To this:
http://i957.photobucket.com/albums/a...rica/floor.jpg
http://i957.photobucket.com/albums/a...ica/floor1.jpg

A productive day in details on this 'new' c-30 truck.

pcmcobra 02-14-2010 09:35 PM

Re: What did you get done 2.14.10 valentines day edition
 
Not much truck related. Did go to Lowes and got hardware for bags/brackets and cups to mount. Ordered big brake front kit and rear...woot.
Got the leaves picked up front and back, finally, was nice in N. Florida today.
Sat around and watched the near 7 hours of Daytona...
Truck should be back this month...I have heard that before.

ont_guy_38 02-14-2010 09:49 PM

Re: What did you get done 2.14.10 valentines day edition
 
Got my motor and rear end home.Lots of work ahead of me

datguysaL 02-14-2010 09:56 PM

Re: What did you get done 2.14.10 valentines day edition
 
1 Attachment(s)
went to check out some transmissions, and rear axles but the guy wouldnt sell it to me. said that the 7004r wouldnt work with my truck.

came home, kickd a few rocks, then decided to instal a LED light bar on my truck, didnt like the way it came out, so i yanked it off, then messed with it a little and ended up doing this. it has stop/turn and reverse on it. should i leave it of take it off?? i kinda like it...

Camaro_nut2001 02-14-2010 10:13 PM

Re: What did you get done 2.14.10 valentines day edition
 
I've been running some new wire and flex to replace some that was cracked and brittle. Got my booster assembly ordered from CPP, you know that special he had posted on here for $299.00. Got my license plate light working. Took my friend out to eat for Valentines and just got home.

Rollinsqrbdy 02-14-2010 10:17 PM

Re: What did you get done 2.14.10 valentines day edition
 
2 Attachment(s)
Ehhh i put on the new Coys and dropped her. As for this morning been lazying around the whole day. Oh and saturday i helped my brother in law, he purchased 2 swb for 300. No motors or Trannys. 1 is a 86 and the other is a 85. Thats bout it. Heres some pics of my truck before and after the drop with the new wheels.

BGRAFX 02-14-2010 10:34 PM

Re: What did you get done 2.14.10 valentines day edition
 
1 Attachment(s)
Got my girl some cool roses, we got a 57in tv for $300 on CL and I got new roll pan and front bumper for my 07 silverado classic.

qu1cks1lver56 02-14-2010 10:42 PM

Re: What did you get done 2.14.10 valentines day edition
 
Quote:

Originally Posted by ShowSS12 (Post 3801012)
Ya them guns suck. I was doing a bed liner on my 85 and it kept clogging too..Since then I picked up the Al's line brand in my shop and I have been waiting to try it out. Their gun looks much nicer, sorta like a big hopper paint gun or a drywall texture.


This weekend I just went out to put out some hay for the cattle, and tried to finish up an 96 Impala I am working on in the shop.... Other than that kids and I hung out while momma was out..

I sprayed my bed with it and never had ANY problems. Sprayed a wood box with it yesterday no problems. Went to use it today and it decided to act up on me.

A hopper gun would be nice, I hate toting around the can of stuff and keeping the hose down in it.

1LowToy 02-14-2010 10:46 PM

Re: What did you get done 2.14.10 valentines day edition
 
Nice and sunny here in the Sierras of California. Truck related I sprained my middle finger LOL. Sprained it getting some seat belts out of an 87 4x. Passenger side is good, drivers side is junk and they don't match mine in my 1980:mm: I also snagged the 87 chrome bumper. Found out the side brackets won't bolt up to my 2wd frame and behind my bent bumper is a bent frame:waah: So much more in parts and nothing going together yet

So I did a couple of hours weed eating, mowed the lawn and drove 80 mile round trip for a cement mixer that was junk. didn't buy that one.

Oh yea I did remember it was Valentines day (by 5:00):devil:

Guess I should have stayed home.

spinem 02-15-2010 12:30 AM

Re: What did you get done 2.14.10 valentines day edition
 
1 Attachment(s)
Attachment 547433

Pulled motor.

flamingbig10 02-15-2010 12:37 AM

Re: What did you get done 2.14.10 valentines day edition
 
Thursday I learned how to drive on the snow, what a experience that was, every time I would stop there would be a mount snow under my truck causing the tires to spin so I would have to back up and plow through it, Friday I decided to drive my jeep to work kept it in 4 high just in case

oldschool18 02-15-2010 01:18 AM

Re: What did you get done 2.14.10 valentines day edition
 
started wet sanding my clearcoat I sprayed last week, hopefully in the next week or two I will have enough time to post some pics of my 85

elwoods76 02-15-2010 02:34 AM

Re: What did you get done 2.14.10 valentines day edition
 
Spent all day saturday hooking up all the little odds and ends on my motor and trans in my blazer. After 3 trips to checker I finished up everything but the exhaust. I did get it fired up for a sec, made the whole day worth it! It's alot easier working on something the whole day when you are in a heated shop :). managed to buy roses and take my wife to dinner too. Spring is looking better and better.

Keith Seymore 02-15-2010 08:33 AM

Re: What did you get done 2.14.10 valentines day edition
 
Lil Red had a big day Saturday -


First, a quick bath....


Then, we hauled some old pallets home, to cut up for the woodburner....


Then, a rescue mission: helped out a damsel in distress (aka my daughter) who ran out of gas on one of the main roads.

After that, a nap!


Sunday we drove down to a Valentine's day party, about 70 miles each way. Got lots of gawkers checking out the shiny paint and wheels (!) including a guy in a grey primered '86 or '87 2wd swb.

K

http://i1016.photobucket.com/albums/...k/100_9714.jpg

Mr.Chevy4x4 02-15-2010 10:45 AM

Re: What did you get done 2.14.10 valentines day edition
 
Put new 4.88:1 gears in a 2008 wrangler rubicon (real pain with e-lockers).

Changed rear gear oil on my 91 K5, added a front drive shaft spacer, and removed the degree shims from the rear spring packs to correct the pinion angle. That eliminated a bad drive line vibration that was driving me crazy. It rides as smooth as factory again!


All times are GMT -4. The time now is 07:35 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com