The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)
-   -   is it bad that my sway bar is missing? (https://67-72chevytrucks.com/vboard/showthread.php?t=13590)

chevy_72 03-17-2002 02:25 PM

is it bad that my sway bar is missing?
 
ya i have a 72 chevy 1/2 ton 2 wheel drive custom deluxe, and it have the brackets for a sway bar but the bar isnt there, should i get on for it or is it ok to leave it alone? im not the man on suspension so i thought id ask some of the more expierienced guys! thanx alot

68chevy 03-17-2002 03:42 PM

its ok to leave it off but if it was on it would handle better in corners

------------------
http://68chevy0.tripod.com/68stepside/
68 Chevy c10 swb stepside 3/5 drop sbc 305/700r4 tranny

Pikeville,Kentucky

slam33 03-17-2002 08:07 PM

Lots of trucks came without them. I put on on mine a couple of yrs ago.

------------------
71 basic C-10 350. The only option is the rust.No nothing on it, but thats all about to change. <A HREF="http://www.geocities.com/stevemau/slam33page.html?1004806705410

" TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410

</A>

DennyB 03-19-2002 12:51 PM

"Sway bars" were an option on 67-72 trucks.
And YES they do make a big improvement in the cornering.

------------------
Toms River NJ
(Transplanted Hoosier)

56 working Street Rod(under construction 71-2 coil chassis)
Give a man a fish and he will eat for a day. Teach him how to fish and he will sit in a boat & drink beer all day.


69 longhorn 03-20-2002 11:37 AM

if you are stock height on suspension,the sway bar will improve cornering. if the truck is lowered,you dont need it.....I tossed the one on my longhorn(excess weight),but its low enough that it corners flat........69 longhorn.

dubie 03-28-2002 11:14 AM

My 72 doesn't have one on it, and it tilts quite a bit on corners. If I was to buy a used swaybar, what should I be looking at? I have heard that any swaybar from 67-87 are all the same. Is this true? And, will it bolt right up with no troubles? I would sure love to have some better handling.

------------------
72 C/10 LWB 2wd
250 inline 6, 3 speed column shift. Soon to have a total facelift.



68SWB4x4 03-28-2002 11:58 AM

yes any bar from 67-87 will work....
look for the bars on 3/4 and 1 ton trucks sense they are bigger

------------------
My Truck pictures

www.xframeimpala.com

68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET"
56 big window short stepside 235 dual 1 brls
64ImpalaSS 327
70 C10 LWB fleetside custom/10 350/TH350
IM me on aol SN= SHAGROLET


Desert Rat 04-06-2002 09:05 PM

Man a 10 second truck,that handlesd like a Porsche would make a sweet daily driver.


All times are GMT -4. The time now is 04:31 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com