The 1947 - Present Chevrolet & GMC Truck Message Board Network - KY SWB, LWB and 9 foot stepside bed parts

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - KY SWB, LWB and 9 foot stepside bed parts (https://67-72chevytrucks.com/vboard/showthread.php?t=829819)

SWB, LWB and 9 foot stepside bed parts

I have one 68-72 SWB driver's side stepside fender with the spare tire cut out (different from long bed cut out). I had this fender media blasted and sealed years ago and I coated the inside with POR-15. It has had no rust nor repairs and is completely solid on the flange and at the bottom where they typically rust. It has small dents present and some POR-15 on the outer surface (runs and fingerprints from when I painted the inside). $450 no shipping but I can hold once paid. SOLD

A set of 8 foot stepside bed sides for a long bed. No rust through but surface rust and pitting present for sure as well as dents, etc. $225 no shipping but I can hold once paid. Now $80

Spare tire carrier for a long bed stepside (different from short bed spare tire carrier). $125 plus shipping. Ask and I'll get you a shipping quote. SOLD

Very hard to find set of steps for a 9 foot (C30) stepside with mounting brackets. These are in great condition with only surface rust and a little slight pitting on the inside of one of them. No rust through at all and not beat up. $400 no shipping but I can hold once paid. SOLD

I'm located in Carrollton KY, zip 41008. I may be able to deliver to the Louisville, Lexington or Cincinnati area if that helps.

I'll post plenty of pics below.