The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   Wiring Connectors (https://67-72chevytrucks.com/vboard/showthread.php?t=400527)

Knothead 05-02-2010 08:09 PM

Wiring Connectors
 
Where can I get the wire connectors that fasten to the gas gauge,temp gauge & stop light switch? Also any input on wiring the blinkers. I've got a Flaming River column, Centech fuse panel & original light switch.

nickp51chevy 05-02-2010 09:31 PM

Re: Wiring Connectors
 
I believe that most if not all of the connections you're asking about use plain old ring connectors. You can get them most anywhere.

Knothead 05-03-2010 07:56 AM

Re: Wiring Connectors
 
These three items have a round post that use an odd type stab on. I have one off the original harness, but can't find any in the parts store.

OrrieG 05-03-2010 12:30 PM

Re: Wiring Connectors
 
I get that stuff from a local shop that rebuilds starters, etc. and has auto electrical wiring supplies. Most of the connectors from main line auto part stores are pretty thin material too.

renegade6 05-08-2010 11:56 AM

Re: Wiring Connectors
 
I believe I have some of the gauge connectors left over from my my American Autowire kit. Send me a PM on Monday and I can shoot you a picture. If it is the correct one, they are yours for the cost of shipping.

Brandon

Knothead 05-10-2010 03:44 PM

Re: Wiring Connectors
 
Thanks for the offer, But I was able to locate the ends I needed at the local junk yard.


All times are GMT -4. The time now is 09:57 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com