72 Chevy truck 4 inch lift question on brake lines
 

I had posted a long time ago when i started this project but im wondering if someone has a part number for longer brake lines for a 72 chevy truck with 4inch lift it seems like the stock ones will be a little short. Thanks for any help

Re: 72 Chevy truck 4 inch lift question on brake lines
 

You can take your hoses from the mounts in the frame.Kit`s come with extension brackets that sre easy to make or rig something up.I don`t know a part number.4wd suppliers sell braided 4-6" lift hose kits.But,the one I bought had the wrong end at the axle on the rear.I ordered a longer one from Inline Tube.Know exactly what you need when ordering.The do OEM-spec duplicates.They`ll do custom.But,you need to know exactly what you need different or the guy will be crappy.

Re: 72 Chevy truck 4 inch lift question on brake lines
 

I don't have the number but you can buy replacement rubber lines from Napa that are longer than stock. If you want to go that route I would have the parts guy pull the replacement hose then ask him to look thru the hoses for a longer one with the same ends.
Or
go aftermarket. I run Earls brand steel braded hoses. You can get them in many differnt leghts. I bought mine from a local speed shop.
:mm::chevy::mm:

Re: 72 Chevy truck 4 inch lift question on brake lines
 

Ok Thanks for the info they dont look like they need to be alot longer but looks like if you could tear them off pretty easy thanks

Re: 72 Chevy truck 4 inch lift question on brake lines
 

I used a 74 K-10 with 4" lift kit from Russell for my 59 since it uses 74 axles that are equivlent to a 4" lift to fit the 59 springs. If I remember right the stock ones are 18" and the ones I got were 22" (braided SS, DOT certified). I called the help line to make sure the fitting would work, they arrived and bolted right in. I think they have kits in 2" length increments. I looked and the kit no is 695730 it has 3 hoses. They list it for 73 up, nothing for 72 but call them they probably have something that will work. Here is link to the site and page:

http://www.russellperformance.com/mc...es_truck.shtml