Parting out 82 Chevrolet K30 Silverado 4x4
 

Parting out 82 Chevrolet K30 Silverado 4x4 single rear wheel. The drivetrain is a 454, turbo 400 trans and a np 205 transfer case. It has a dana 60 front axle with 4:10 gears. Power windows and locks tilt. Body is rusty. Shipping is fine on anything smaller just local pickup only on anything big. Once I get the drivetrain pulled what left of the body will be going in for scrap. If interested in a item just ask and I will price it and get more pics if needed.

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

Does that have a 2wd cab on it? It looks like it doesn't have a high hump in the center or is it just me...

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

How much for the fendr emblems? Shipping to 80134
Posted via Mobile Device

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

What does the drivers side pwr window switch look like?

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

hayesperformanceplus, yes the orevious owner changed out the cab to a 2wd cab and I'll get a clase up pic of the drivers side power window switch for you later today.

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

cochino12, $32 shipped for the pair of front fender emblems, as long as they come off ok.

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

how much for the tool box.

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

falze, $50 for the toolbox if picked up.

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

Toolbox sold to falze pending payment. Thanks!

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

what kind of shape is the dash pad in?

thanks
Scott

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

ScottH, dash pad isn't in good condition, has some cracks.

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

Power window and door lock switch pics

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

hows the cab trim?

any tailgate band?

is that a wiper delay switch i see?

how about the plastic piece under the dash that connects the center air vents to the driver side vents?

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

blackbeaSSt, I don't have the tailgate band or the plastic piece under the dash that connects the center air vents to the drivers side vents. The cab trim is in ok dd condition with a few little dings $40 plus shipping. Wiper delay switch $20 shipped

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

drip rail trim above the doors? shape and how much to 45631

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

Forgot, the steering gear box? how much and shipping?

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

if you can grab some pics of said dings that would be great. and if the delay switch is working and comes with all the needed wires/modules i'll take it for $20

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

bowtiebuilder, Do you just want the chrome drip rail or do you want the metal piece that mounts to the cab and the screws also?

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

blackbeaSSt, Here are some close up pics of the cab trim. There is one little ding on the passenger corner and another little dent on the back piece about a foot in from the passenger side.

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

The pieces that screw to the cab
Posted via Mobile Device

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

bowtiebuilder, $25 plus shipping for both drip rail assemblys and $65 shipped for the steering gearbox.

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

My BIL (oldwagon) is looking for a good pair of passenger and driver wing or window vents. He has an '83 K30 4x4 which I would think would fit with '82 wings. Anybody know for sure what years interchange? Also looking for a good brushed aluminum dash bezel. I'll send him a PM to check your posting.

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

Need at least one but how much for the front hub caps?

Shipping to 61607 - Peoria

Next in line for the fender emblems.

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

48cj2a, Are you looking for a stock dana 60 front hubcap? I do have a set of the factory dana 60 front hubcaps but the ones pictured on the truck are just dana 44 hubcaps with the opening cut out bigger. I have a couple different sets if you let me know what you need.

Re: Parting out 82 Chevrolet K30 Silverado 4x4
 

How about the front u-bolt plates to 21771?