Re: Intro and Some Photos of my '63 Project
Every time I see your 63 Vin my mouth waters:lol::chevy: love your 63.
|
Re: Intro and Some Photos of my '63 Project
Lets get this back up. Love this thing.
|
Re: Intro and Some Photos of my '63 Project
welcome Neighbor. Dont know if its my computer or what but I cant see any of the pics.
|
Re: Intro and Some Photos of my '63 Project
Thanks, guys. I haven't done too much since I've been putting a lot of time and energy into my funny car project. But, I did finish the frame and plugged all of the holes in the firewall (PO drilled a 100 holes for various things) - I still need to replace some floor sections in the cab since the PO installed several diiferent seats while he had it. I started to do final mock ups of the cab and bed.
http://i268.photobucket.com/albums/j...1Enginejpg.jpg http://i268.photobucket.com/albums/j...Exhaustjpg.jpg http://i268.photobucket.com/albums/j...711Rearjpg.jpg http://i268.photobucket.com/albums/j...711Sidejpg.jpg |
Re: Intro and Some Photos of my '63 Project
Yes ! Vin lov this truck and your work is primo!!post some pics of your race car!
|
Re: Intro and Some Photos of my '63 Project
Quote:
http://i268.photobucket.com/albums/j.../Pontiac83.jpg http://i268.photobucket.com/albums/j...D/IMG_4879.jpg ...body repaired and painted http://i268.photobucket.com/albums/j...ody_MockUp.jpg |
Re: Intro and Some Photos of my '63 Project
Welcome, i don't see thefender pictures! Please repost them.
Posted via Mobile Device |
Re: Intro and Some Photos of my '63 Project
Looking good and a nice setup combo!
Gonna keep an eye on your build! I even dig the Poncho engine! Where did you get the front support tubes? How is your front and rear suspenion set up? Can kinda guess by the pics... More pics of that front and rear end! Plans for front inner fender wells? Plans for using tubs in the rear? Hoozier hides are cool.... I'm a Mickey Man Fan;)http://www.jegs.com/images/mini/600/672/672-6565.jpg http://shop.racingjunk.com/images/T/t-16168-34.gifhttp://www.vpracing.fr/boutique_us/i...00931-c360.jpg http://image.automotive.com/f/images..._fuel+hemi.jpg |
Re: Intro and Some Photos of my '63 Project
Thanks...here's an older photo of the front fender modification I do to help with proportion of the opening between the front and rear openings.
http://i268.photobucket.com/albums/j..._MockedUp3.jpg The forward bars I fabricated from leftover roll cage stock. I made it a bolt-in set up, so that I could remove it to make engine removal and installation easier. It's a front and rear air spring set up just so I can have a little ride height adjustability for the roads out here, plus the approach to my driveway is a little steep. Inner front fenders are stock and I widened my pair of rear wheel wells. http://i268.photobucket.com/albums/j...rwarStrut2.jpg http://i268.photobucket.com/albums/j...ubs_both_a.jpg |
Re: Intro and Some Photos of my '63 Project
:metal:Roger that!:metal:
|
Re: Intro and Some Photos of my '63 Project
Nice looking ride vin.. Done anymore work or is that flopper still takin up time?
|
Re: Intro and Some Photos of my '63 Project
Thanks...I did make and weld in some patch panels for the cab this past weekend, but spending most of my time tearing down and examining the funny car engine after a short 9K RPM pass just to see if it liked it - so far nothing wrong. Replacing the main and rod bearings with Calico coated bearings. Just re-stripped the impellars on the supercharger and getting ready for runs in the new year.
http://i268.photobucket.com/albums/j...Post9KRPMs.jpg http://i268.photobucket.com/albums/j...aperweight.jpg |
Re: Intro and Some Photos of my '63 Project
Quote:
Nice work on the '63 !! J |
Re: Intro and Some Photos of my '63 Project
Quote:
|
Re: Intro and Some Photos of my '63 Project
Quote:
|
Re: Intro and Some Photos of my '63 Project
So Vin, how goes it on the 63 build?
Since you chose to improve your truck by putting a mighty Pontiac mill in her... I sure have been curious of your progress... I have 2 63's that I tinker on every time I get a chance. Both get a Pontiac. :) ;) :5150: |
Re: Intro and Some Photos of my '63 Project
Just got back from the pre-March Meet open testing at Bakersfield. At the end of last year, I stepped up to a 44 amp ProMag and I'm now running 70% nitro, but this necessitated a lot of other parts.
http://i268.photobucket.com/albums/j...o_44ampmag.jpg http://i268.photobucket.com/albums/j...lownPoncho.jpg Since I've been putting all of my energy into running a funny car, there isn't much time leftover for my shop truck project. I did finish the body work on the cab, installed some sound/thermal barrier, mounted the AC evaporator, and sprayed some 3M sealant/sound deadener under the cab and the bottom portion of the firewall. I hope to mount all of the sheetmetal and drop it off for paint this summer... http://i268.photobucket.com/albums/j...plifierPro.jpg http://i268.photobucket.com/albums/j...ic_coating.jpg http://i268.photobucket.com/albums/j...20Up/Evap1.jpg |
Re: Intro and Some Photos of my '63 Project
**********NICE**********
And it is Indian powered... ;) :5150: |
Re: Intro and Some Photos of my '63 Project
Quote:
http://i268.photobucket.com/albums/j...psafdd351b.jpg |
Re: Intro and Some Photos of my '63 Project
A shot from the pre-March Meet pro test and tune...
http://i268.photobucket.com/albums/j...psea6a7249.jpg |
Re: Intro and Some Photos of my '63 Project
Phew…with the racing season done, I was able to make some progress on getting the Poncho C10 project off to paint. I realigned the fenders, radiator support, hung the doors, mounted the bed and tailgate, aired up the suspension and put it in the box and dropped it off a my friend's shop.
http://i268.photobucket.com/albums/j...ps583ea204.jpg http://i268.photobucket.com/albums/j...psb247d23e.jpg http://i268.photobucket.com/albums/j...ps088944d6.jpg |
Re: Intro and Some Photos of my '63 Project
All right.
|
Re: Intro and Some Photos of my '63 Project
Did you make the front wheel well openings like the rear ?? I could not see it from the pictures .. Thanks
|
Re: Intro and Some Photos of my '63 Project
I lowered the lip 2.5 inches on the front fenders. I always thought the front fender opening was a bit too tall - not much fender over the wheel opening. So, I sectioned the fender and lowered the lip. Here's kind of a before and after:
http://i268.photobucket.com/albums/j...ps37f498f0.jpg |
Re: Intro and Some Photos of my '63 Project
can't wait to see it painted
|
All times are GMT -4. The time now is 11:14 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com