To the current and future 700R4/4L60/4L60E swappers, a must have part to install.....
For anyone doing this swap.... a Vette servo for the trans is a definite must-have! I finally got around to installing mine this weekend, and I can't believe what a difference it makes! 1-2 shifts at WOT will bark the tires, and 3-4 is very snappy. Although this mod mostly affects the 1-2 and 3-4 shifts, I can definitely tell that the 2-3 shift are much firmer also.
These literally take 15 minutes to R&R, and take no special tools. A pry bar, a couple small screwdrivers, a c-clamp, and a pair of pliers or channel locks. It really helps if you have a helper around when putting it back together to help get the cover back on, but it can be done alone. The servos can be bought off eBay for around $20. I got mine from Oregon Performance Transmissions off of eBay, and have bought many other trans parts from them, including a stall converter several years ago. They have good quality parts. In fact, I think the Vette servos are TransGo parts. These can be installed easily enough while in the vehicle, but save yourself a little time and effort and do it while the trans is still on the shop floor. You won't be sorry!! Here is a great how-to: http://www.gmfullsize.com/forum/showthread.php?t=98029 |
Re: To all the current and future LS/4L60E swappers, a must have part to install.....
Thanks for the info Bob.
|
Re: To all the current and future LS/4L60E swappers, a must have part to install.....
Same deal for anybody running a 700R4. The Corvette servo makes a very noticeable improvement in shifts.
|
Re: To all the current and future LS/4L60E swappers, a must have part to install.....
Quote:
|
Re: To the current and future 700R4/4L60/4L60E swappers, a must have part to install.
I have done this before and it is WELL WORTH EVERY PENNY. Definate improvement over stock. Cheap too.
|
Re: To the current and future 700R4/4L60/4L60E swappers, a must have part to install.
Yup I had one before blowing up the last 700R4. Loved it. The current tranny has a super servo! Now that one is a neck snapper!
|
Re: To the current and future 700R4/4L60/4L60E swappers, a must have part to install.
anything simple like this for a TH350?
I plan on buying a shift kit before too long, but they're not cheap. |
Re: To the current and future 700R4/4L60/4L60E swappers, a must have part to install.
You can install a governor on the transmissions too. WOT will shifts will be higher. Corvettes and police cars had the option.
You can find parts at www.bulkpart.com My 700R4 is modified to shift into OD at WOT!! I have not tried it yet. I've made it up to 110+ MPH in third gear before letting off. I'm curious at what speed it should shift into OD. |
Re: To the current and future 700R4/4L60/4L60E swappers, a must have part to install.
are you talking about torque converter lockup ? you cant wire od it just shifts in to od after 3ed gear but you should wire up tc lock up in 4 gear thats how i have mine and its fine cuz most of the time you arnt on throttle in 4th just cruzin but you can allway put a toggle switch inline to turn it off for those high speed runs and toggle it back on
|
Re: To the current and future 700R4/4L60/4L60E swappers, a must have part to install.
Quote:
|
Re: To the current and future 700R4/4L60/4L60E swappers, a must have part to install.
yep, I prefer the servo over a shift kit. All of our vehicles have one. They just feel so right. My '08 silverado will bark the tires on a cold morning with the vette servo.
|
Re: To the current and future 700R4/4L60/4L60E swappers, a must have part to install.
Corvette Serve was easy to install and did wonders for my shifts..... until I later decided to do a filter/fluid change and then the shifts went all downhill from there. A rebuild is in the works soon.
|
Re: To the current and future 700R4/4L60/4L60E swappers, a must have part to install.
Will this work on a 4L80E ??
|
Re: To the current and future 700R4/4L60/4L60E swappers, a must have part to install.
700s have governors, you can shave some weight off them to hold shifts a little longer. or you can buy aftermarket but you can grind some weight off the stock and do the same thing. IF you REALLY want it to snap into gear... put a billet super survo in it. It will knock your head threw the back glass.
|
Re: To the current and future 700R4/4L60/4L60E swappers, a must have part to install.
I have a question about this mod on a 4L60E. I just finished my 05 5.3L install in LowBuk and it all works great. The shifts are very smooth from gear to gear but I can feel the smallest about of slip during the transition from gear to gear. I would like it a bit tighter but I really do not want to feel any shift bang from gear to gear like I had with my built 700R4. Will this mod keep the very smooth shifts or will it have the affects of a shift kit?
Thanks for the info! Kevin LFD Inc. |
Re: To the current and future 700R4/4L60/4L60E swappers, a must have part to install.
Is there a how-to on T350 - 700R4 swap somewhere?? My 79 Chevy has 3:73 gears and Im considering doin the 700R4 deal.
|
Re: To the current and future 700R4/4L60/4L60E swappers, a must have part to install.
my 700 has a corvette servo as well as an actual corvette shift kit, its barked the tires going into 4th gear like twice since modding it. itll almost ALWAYS put the truck sideways shifting into 2nd and majority of the time i can bark into 3rd
Heres a video of it on a VERY WELL prepped track that nearly pulled my shoes off when walking on it |
Re: To the current and future 700R4/4L60/4L60E swappers, a must have part to install.
Did you remove the grill turn signal lights? Nice video.
|
Re: To the current and future 700R4/4L60/4L60E swappers, a must have part to install.
Does the vette servo effect part throttle shifts? After 15 years of my B&M shift kit shifting hard at anything over half throttle, i'm looking for a smoother shift.
|
Re: To the current and future 700R4/4L60/4L60E swappers, a must have part to install.
never had grille lights
|
Re: To the current and future 700R4/4L60/4L60E swappers, a must have part to install.
Quote:
|
Re: To the current and future 700R4/4L60/4L60E swappers, a must have part to install.
I agree. My transmission guy includes the Vette servo and converter in all his 700 builds. 99% of his builds are for street rods etc.
|
Re: To all the current and future LS/4L60E swappers, a must have part to install.....
Quote:
So this can be done for the 4L60/4L60E Trans?? |
Re: To the current and future 700R4/4L60/4L60E swappers, a must have part to install.
o the subject of 700R4's , has any heard of this company ?
http://monstertrans.com/store/catego...-Rebuild-Kits/ any thoughts or comments bout them or there product's ? I wanna rebuild the 700R4 in my S10, also put one in the dually and a '78 Cutlass I'm gonna restore for my girlfreind. |
Re: To the current and future 700R4/4L60/4L60E swappers, a must have part to install.
Re: Monster Transmissions`
I bought a 2000 stall torque converter from them a few years ago, and I was really happy with their service. Nice, friendly folks. |
All times are GMT -4. The time now is 10:51 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com