The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)

- - PBFab frame stiffener (https://67-72chevytrucks.com/vboard/showthread.php?t=793581)

19Loki67

09-16-2019 11:10 PM

PBFab frame stiffener

Has anyone used the PBFab frame stiffener with a RideTech strongarm rear coilover setup?
Posted via Mobile Device

19Loki67

09-19-2019 09:08 PM

Re: PBFab frame stiffener

Bump
Posted via Mobile Device

EVRLET

09-26-2019 01:42 AM

Re: PBFab frame stiffener

I don’t have the frame stiffner but I do have the rest of the PB front and rear suspension. What are your concerns or questions?

19Loki67

09-26-2019 11:20 AM

Re: PBFab frame stiffener

I’m wondering if the ride tech trailing arms will mount to the trailing arm mounts on the frame stiffener. Like is the spread on the mounts the same?
Posted via Mobile Device

SCOTI

09-26-2019 07:15 PM

Re: PBFab frame stiffener

Quote:

Originally Posted by 19Loki67 (Post 8599610)

I’m wondering if the ride tech trailing arms will mount to the trailing arm mounts on the frame stiffener. Like is the spread on the mounts the same?
Posted via Mobile Device

They should be. The manufacturers are who I would reach out to though to be certain.

That being said, if one or the other required custom rear-end mounts to compensate for some sort of design change, then I would be hesitant. If both set-ups work w/a factory T/A rear end, I would think you'll be ok.

All times are GMT -4. The time now is 08:38 AM.