EVERYTHING MUST GO, (72 custom20, 462BB, some free parts)
 

the 71 is almost done, just needs paint, so i am getting rid of everything. i am keeping my swb frame and the ac cab from the 72 for a frame up one day.

72 chevy lwb bed-good straight, diamond plate bedfloor-$500
72 lwb 3/4 frame with disc and dana 60 posi-make offer on all or some
2 fleet tailgates-free
pair of swb bedsides, need work-free
big ass diamond plate bumper for 72-$20
front chrome bumper for 72-$20

462 BB, bored, honed, built, 292 heads, decked, 3 angle valve job, ported, etc, new everything, fresh, never cranked. alum weiland intake, nice and oily on stand, included
i will get the spec sheet tomorrow. no dist, carb, pulleys- $2500

402 bb, taken apart because of vent exhaust valve (from above truck) complete, ac comp rebuilt, all pulleys, $200

comp cams k kit, 268h cam, all the stuff, brand new in box with reciepts. i have to check the price in summit, but i want 100 less than what it sells for in summit.

4 alloy 8 lug rims with tires that hold air- $50

4 ugly alloy 6 lug rims with old tires-$10

if you think of anything that i might have on the 72 let me know. i might even sell the dash bezel and tilt, but i dont know yet.

i will ship anything that i can, i mighteven drive some for the big stuff. i havent sold anything in years on here, but i have sold to 3 or 4 members. if it doesnt get sold it goes to the scrap.

oh yeah, i will post as many pics as you need by request

I'minterested in the 402, or at least all the pulleys and brackets, and the swb sides. I'll PM you.

Your pm box is full.

Ditto on the 402 pullies and brackets...if Hugger doesn't take em.

Greg

i cleaned out my box. 402 goes all or nothing. if i sell the brackets alone nobody will ever want the 402.

Can you give me a pic of the back side of the rims?

the 8 lug or the 6? i'll get a pic as soon as possible and post

Would like a pic of the 8 lug rims - SDELVY55@aol.com. Also, would u have ps setup for the big block?

Thanks

inspection sticker is from 99 on the 72. i will eventually sell all of the ac stuff too, but thats not taking up room like the bed/cab/ motor

free bedsides for hugger

they look really good in the pic, but i started sanding on the other one and it had tons of filler. the other one is covered in primer because i used to adjust my spray gun on it.

the 72 (back window sold a year ago to 70 cst)

more

Thanks for the pics. Can u give me an idea on shipping costs of the four 8 lug wheels (minus tires) to 08753? Also would you be willing to sell posi carrier itself (what ratio?), and what about the BBC valve covers in the last pic?

Scott

Interested in the wheels, what is the size of the 8 lug wheels 15 or 16 and how wide? I could get Hugger to pick them up for me if they'll work. ;)
thanks,
Matthew

If others before me pass on them.

what shape is the front bumper in? If its presentable i want it will you ship?n pm me with the details

I pm'd you....Interested in the 402...

Sorry, I was interested in the 6 lug rims. What part of Louisiana are you from? I might be able to pick them up.

What brand are the BB valve covers in the last pic sitting in front of the box? Interested if ScottH doesn't want that pair.

you said you have a 268h kit is that for SB or BB? im interested in that if its for SB.

PM sent, need a tailgate

I'd be interested in the 402 heads if you wanted to sell the pulleys and stuff off.

How far from the Texas border are you?

i dont have time to answer everything rightnow, bt i'm 2 minutes from Baton Rouge and i go to school in Hammond. i have to work all day today but i'll start geting shipping costs this evening. the valve covers are blasted, i tried to take the chrome off and messed up the alum. in some places, so i doubt anybody would want them.

comp k-kit is for a BB.

nobody needs a lwb bed?

tx firefighter, that sounds good, i'll get pics and we'll go from there