The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Tricked-out Chevy six cylinder engines (https://67-72chevytrucks.com/vboard/showthread.php?t=276823)

TJ's Chevy 03-24-2013 10:51 PM

Re: Tricked-out Chevy six cylinder engines
 
Quote:

Originally Posted by KroAutomotiveInc (Post 5968474)
Heres a picture of a split manifold easy way to get dual exhaust also doesn't take away your exhaust heat to the intake.

http://i61.photobucket.com/albums/h7...psca4d1c7d.jpg

Watch out for leaks!:lol:Have plenty on mine. Poor ol :chevy:.:whine:

TJ's Chevy 03-24-2013 10:53 PM

Re: Tricked-out Chevy six cylinder engines
 
[QUOTE=KroAutomotiveInc;5968474]Heres a picture of a split manifold easy way to get dual exhaust also doesn't take away your exhaust heat to the intake.

http://i61.photobucket.com/albums/h7...psca4d1c7d.jpg[/Q

Just show me the car fax man!:waah::devil:

KroAutomotiveInc 03-25-2013 03:23 AM

Re: Tricked-out Chevy six cylinder engines
 
yeah welding cast is a bit tricky forsure!

TJ's Chevy 03-25-2013 11:34 AM

Re: Tricked-out Chevy six cylinder engines
 
OH THE DRAMMA!:drama::waah::lol:

TJ's Chevy 03-25-2013 03:09 PM

Re: Tricked-out Chevy six cylinder engines
 
Quote:

Originally Posted by KroAutomotiveInc (Post 5968509)
Ive also found with my 230 that removing the motor fan and using an electric fan has made a noticeable power increases to the motor lol!

Thats funney!:lol: Cause my friends was tellin me me it would not male a noticeabe
differance:hc: Shame on them! Just kiddin!:lol::lol::lol:

TJ's Chevy 03-28-2013 06:58 PM

Re: Tricked-out Chevy six cylinder engines
 
YA Know its been awfully quiet here........I thinks we need some new hot rod 6
cylinder chevys.:chevy::exit:

TJ's Chevy 03-28-2013 07:01 PM

Re: Tricked-out Chevy six cylinder engines
 
Quote:

Originally Posted by KroAutomotiveInc (Post 5969317)
yeah welding cast is a bit tricky forsure!

Ya know, Theres nothin better than a triple carb setup on a 6 cylinder. The
only problem for me is trying to get them all ajusted evenly.:whine:

KroAutomotiveInc 03-28-2013 08:04 PM

Re: Tricked-out Chevy six cylinder engines
 
Quote:

Originally Posted by T.J. MCCAULEY (Post 5977115)
Ya know, Theres nothin better than a triple carb setup on a 6 cylinder. The
only problem for me is trying to get them all ajusted evenly.:whine:

yeah cant beat the look but i say just use a 4bbl and make it easy on yourself lol!

Vernski 03-28-2013 10:24 PM

Re: Tricked-out Chevy six cylinder engines
 
1 Attachment(s)
Quote:

Originally Posted by KroAutomotiveInc (Post 5977213)
yeah cant beat the look but i say just use a 4bbl and make it easy on yourself lol!

I put a Edelbrock 1404 manual choke on my 230 it worked good right out of the box. I set it on a Clifford hot water heated intake. The motor has a Mercrusier boat cam and pulls hard from idle on up, plus runs smooth at idle. It also has Langdon Headers. What I would like to run is two Weber 2 barrels [check this link] https://www.cliffordperformance.net/ But that will be when I win the lottery some day. I love the looks of Tri-power I had some on a old 235 but it drove me nuts trying to get 3 carbs in tune. Here is a pic of my 230...Vernski:lol:

KroAutomotiveInc 03-28-2013 11:47 PM

Re: Tricked-out Chevy six cylinder engines
 
that is one sweet 230 Vernski you gotta take me for a ride some day!

slepysal 03-29-2013 12:54 AM

Re: Tricked-out Chevy six cylinder engines
 
thats sweet Vernski, were did you get your breather cap ?

TJ's Chevy 03-29-2013 12:56 AM

Re: Tricked-out Chevy six cylinder engines
 
That is one awsome 6 cylinder ya got there! Wish mine looked like it.:chevy:

TJ's Chevy 03-29-2013 01:13 AM

Re: Tricked-out Chevy six cylinder engines
 
Has anybody here ever used the lump port head? And a good cam ta go with
it? I almost made a big mistake in cam selection! Never do that!:dohh::dohh:

Vernski 03-29-2013 02:07 AM

Re: Tricked-out Chevy six cylinder engines
 
Quote:

Originally Posted by slepysal (Post 5977823)
thats sweet Vernski, were did you get your breather cap ?

I bought the breather cap at either Speedway or Jegs been awhile since I picked it up, oldtimers you know...Vernski:lol:

[KRO & TJ] thanks for the thumbs up on the truck...Vernski:lol:
[slepysal]

RANDY COX 03-29-2013 06:37 AM

Re: Tricked-out Chevy six cylinder engines
 
Quote:

Originally Posted by Vernski (Post 5977502)
I put a Edelbrock 1404 manual choke on my 230 it worked good right out of the box. I set it on a Clifford hot water heated intake. The motor has a Mercrusier boat cam and pulls hard from idle on up, plus runs smooth at idle. It also has Langdon Headers. What I would like to run is two Weber 2 barrels [check this link] https://www.cliffordperformance.net/ But that will be when I win the lottery some day. I love the looks of Tri-power I had some on a old 235 but it drove me nuts trying to get 3 carbs in tune. Here is a pic of my 230...Vernski:lol:

Vernski,I really Like your truck the engine looks AWESOME,Yrs ago my brother got an old boat it had a 250 six in it,I took it out rebuilt the head on it had it sittin on an stand got me a offenhauser 4-barrell intake and an holley carb,and all hooked up to radiator and let it run to make sure there were no cracks,the engine still had the crosshatch pattern inside of cylinder walls.This was gonna be a candidate for my burb if i needed it,but sold burb yrs ago,still have engine,with the marine cam I bet it would be a good pullin motor,Oh well maybe one day I'll use it...:chevy:

chevy_man5 03-29-2013 09:29 AM

Re: Tricked-out Chevy six cylinder engines
 
1 Attachment(s)
Not really tricked out... yet, but here is my sons 292 loaded up and coming home with us.

TJ's Chevy 03-29-2013 01:01 PM

Re: Tricked-out Chevy six cylinder engines
 
Yer 230 look better than my 292! Thats fer sure!:chevy::chevy:

boucher racing 03-29-2013 04:35 PM

Re: Tricked-out Chevy six cylinder engines
 
Quote:

Originally Posted by chevy_man5 (Post 5978165)
Not really tricked out... yet, but here is my sons 292 loaded up and coming home with us.

Hmmmm, I love that Alpine Green, fresh on a clean block. Enjoy it b/c it will never look that good again!

chevy_man5 03-29-2013 05:12 PM

Re: Tricked-out Chevy six cylinder engines
 
Question for you all.

The 292 we got is out of a '63, and my sons truck is a '65. According to this chart, in '63 the engine would have been Green, but in '65 it would have been Green-Dark/Gray.

http://www.oldchevytrucks.com/Articles/Engine-Paint.php

What parts would have been Dark Green and which parts would have been Gray? Or is that an either or color? It would have been Dark Green or Gray?

And how much darker would the Green have been?

KroAutomotiveInc 03-29-2013 05:24 PM

Re: Tricked-out Chevy six cylinder engines
 
i was wrong 292's started production in 1962 didnt know that!

KroAutomotiveInc 03-29-2013 05:26 PM

Re: Tricked-out Chevy six cylinder engines
 
i guess the chart shows it in all years tho interesting

TJ's Chevy 03-29-2013 06:09 PM

Re: Tricked-out Chevy six cylinder engines
 
Quote:

Originally Posted by KroAutomotiveInc (Post 5978879)
i was wrong 292's started production in 1962 didnt know that!

I thought that the 292 came out 1963!:chevy:

gimmy 64 03-29-2013 08:14 PM

Re: Tricked-out Chevy six cylinder engines
 
Quote:

Originally Posted by Vernski (Post 5977502)
I put a Edelbrock 1404 manual choke on my 230 it worked good right out of the box. I set it on a Clifford hot water heated intake. The motor has a Mercrusier boat cam and pulls hard from idle on up, plus runs smooth at idle. It also has Langdon Headers. What I would like to run is two Weber 2 barrels [check this link] https://www.cliffordperformance.net/ But that will be when I win the lottery some day. I love the looks of Tri-power I had some on a old 235 but it drove me nuts trying to get 3 carbs in tune. Here is a pic of my 230...Vernski:lol:

DANG Vernski with the new paint job an this motor i figure i will be seeing your'e truck in classics trucks soon !!!!!!!

TJ's Chevy 03-29-2013 08:36 PM

Re: Tricked-out Chevy six cylinder engines
 
Quote:

Originally Posted by chevy_man5 (Post 5978854)
Question for you all.

The 292 we got is out of a '63, and my sons truck is a '65. According to this chart, in '63 the engine would have been Green, but in '65 it would have been Green-Dark/Gray.

http://www.oldchevytrucks.com/Articles/Engine-Paint.php

What parts would have been Dark Green and which parts would have been Gray? Or is that an either or color? It would have been Dark Green or Gray?

And how much darker would the Green have been?

Hey chevy man,
My 66 chevy 1/2 ton has a 292 and it originally was a forest like green.
My 64 chevy 3/4 ton also has a 292 and it was originally blue. hope that helps.:chevy::):)

awbrown 03-29-2013 08:52 PM

Re: Tricked-out Chevy six cylinder engines
 
Vernski ,I did get a trip setup to work , but my friend did most of the work ...progressive linkage that took him 14 hrs to build...


All times are GMT -4. The time now is 11:30 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com