The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   60-66 Suburbans (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=241)
-   -   1966 CHEVROLET suburban engine question (https://67-72chevytrucks.com/vboard/showthread.php?t=773382)

1966burb 10-15-2018 11:43 PM

1966 CHEVROLET suburban engine question
 
I want to verify the date on the engine block of the 327 that came out of my 1966 Suburban. Casting # on rear of block is 3858174. The other casting numbers I find are on the back of the block which would be under the flywheel. H5 174. Is this the date or do I need to look somewhere else for the date? Thanks, Jim

Captainfab 10-16-2018 12:38 AM

Re: 1966 CHEVROLET suburban engine question
 
The casting date is cast into the block on the passenger side of the block, above where the flywheel is. It does consist of a letter which corresponds to the month of the year, then the day of the month and then the year as a single digit.

1966burb 10-16-2018 11:32 PM

Re: 1966 CHEVROLET suburban engine question
 
1 Attachment(s)
Here is a photo of the back of the block. Any ideas on date?

Captainfab 10-17-2018 12:19 AM

Re: 1966 CHEVROLET suburban engine question
 
That looks like it is behind the flywheel.....I do not see any date code there. The date code is located where I previously said.

This is on a big block but a small block casting numbers and date codes are in the same location.

http://www.67-72chevytrucks.com/vboa...d.php?t=773368

1966burb 10-17-2018 01:20 AM

Re: 1966 CHEVROLET suburban engine question
 
1 Attachment(s)
just had to look in the correct spot and scrape off some grease to find it!

Captainfab 10-17-2018 11:16 PM

Re: 1966 CHEVROLET suburban engine question
 
Does that say B 4 6 ? If so, the block was cast on February 4th 1966. The casting number does show to be a 1964-67 327. What is the stamping on the front pad?

1966burb 10-18-2018 10:02 AM

Re: 1966 CHEVROLET suburban engine question
 
Yes B 4 6 . I will check stamped number on front.

1966burb 10-21-2018 10:31 AM

Re: 1966 CHEVROLET suburban engine question
 
1 Attachment(s)
stamping on front reads FO2O9YD

VictoriaHardware 10-21-2018 08:15 PM

Re: 1966 CHEVROLET suburban engine question
 
So far so good. Block cast on Feb 4, final assembly on Feb 9. At Flint Engine Plant on Bristol Road, which is gone now.

Captainfab 10-21-2018 11:51 PM

Re: 1966 CHEVROLET suburban engine question
 
Here is the suffix code info.

http://www.nastyz28.com/gm-chevy-cod...-suffix-10.php

1966burb 10-22-2018 09:55 AM

Re: 1966 CHEVROLET suburban engine question
 
Thanks for all the information and help. Everything seems to line up good as original engine. J

VictoriaHardware 10-24-2018 12:34 PM

Re: 1966 CHEVROLET suburban engine question
 
Quote:

Originally Posted by Captainfab (Post 8369229)
Here is the suffix code info.

So YD = Powerglide w/ A.I.R.

Your motor had A.I.R. (smog pump) ? Was it originally sold in California?

1966burb 10-25-2018 12:06 AM

Re: 1966 CHEVROLET suburban engine question
 
It does have the plugs in the exhaust manifolds where the A.I.R. system used to tie in.


All times are GMT -4. The time now is 02:28 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com