Installing Coil Spring pinion shims
I have a slight drive line vibration between 45-48 mph in my lowered Coil spring truck. 2.5" drop spindles with 2" lowering springs up front. The rear has 4" lowering springs. ( No C notch). Anyway my pinion angle is pointing downward. I ordered some pinion shims. They look pretty straight forward to install but I figure I would ask before i do it to save me from doing any unnecessary work.
Thanks for any advice, Matt In case anyone is need of shims this is where I ordered them from. https://www.performanceonline.com/19...ar-Suspension/ |
Re: Installing Coil Spring pinion shims
Pull the U-bolt and slide it in tighten the u-bolt back up. My blocks have 2 degrees milled into them.
Jimmy |
Re: Installing Coil Spring pinion shims
Quote:
|
All times are GMT -4. The time now is 02:51 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com