250 inline 6 value
Well the frame is shot on my 68 c10 and i was wondering what do you guys think a fair price on craigslist would be for the strait 6 in good running condition all original with new plugs and wires? Thanks.
|
Re: 250 inline 6 value
-
Too bad you are not closer. I would give you a good frame.... LockDoc |
Re: 250 inline 6 value
The truck is also very rusty, i'm just going to use most of the good parts to fix another one of my trucks. Thanks for the offer though.
|
Re: 250 inline 6 value
Around here I ocassionally see a 250/6 on CL for $200-500,Unfortunately I don't know if they ever sell.The other thing about them is they "Runs good" but are out of the truck.So how do I know it runs good?
|
Re: 250 inline 6 value
Quote:
If they are pretty much complete & you have a jump starter or battery and an oil pressure gauge you can start them sitting on the floor. I just did that with 2 292's I just got. Just attach the oil pressure gauge, hook the negative cable to the block, positive cable to the large post on the starter solenoid, a jumper wire from the positive cable to the coil or HEI, pour a little gas in the carb and momentarily short the positive cable to the S terminal on the solenoid. It should fire right up. Listen to how it sounds and check the oil pressure. You may have to start it a couple of times to get the oil pressure read. LockDoc |
Re: 250 inline 6 value
Yah that a good idea, i also have a stand to run engines on with ignition and a radiator. It helped me sell a 350 i had. I figured people would choose hearing one run over taking someones word as there are alot of untrustworthy people out there. Like the guy i got this truck from, my dad picked it up for me and he just had shoulder surgery and didnt look it over. He told me i could drive it home and the frame is really bad. He failed to mention that lol.
|
Re: 250 inline 6 value
This pic is when i first got home to see it. After a couple small rides the rear coil is now coming through the rotted bed floor. I think thats about as bad as it gets.
http://i651.photobucket.com/albums/u...t/102_2735.jpg |
Re: 250 inline 6 value
6 cylinder motors in this area you just about have to pay somebody to take them away// i had a 250 5years ago couldnt give it away for free with 6months of listing on craigs was hooked up an ran good finally went to scrap yard i think i got like 57cents for it
|
Re: 250 inline 6 value
Quote:
|
Re: 250 inline 6 value
There is a 250 for sale here locally for 250. Been on there for 3-4 months now and has gone down from 300 at least. Same guy is trying to sell a SM465 for 350. But he also has it listed in a separate ad for 300. I think he is just your run of the mill junkyard guy. I think both of them are worth it if it is what you want. I am vaguely interested in both but I would go in there lowballing and deal from there.
|
Re: 250 inline 6 value
Ok thanks guys i kind of had a feeling it wasn't worth much i was just kind of wondering if i should worry about pulling it but i will probably just leave it in.
|
All times are GMT -4. The time now is 10:38 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com