The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (http://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (http://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   What did you do with your truck today, Part 3 (http://67-72chevytrucks.com/vboard/showthread.php?t=713560)

63 & 64 Bowties 07-27-2016 10:02 PM

What did you do with your truck today, Part 3
 
Part 1 & 2 were pretty overloaded, so let's get going on a new one.

iowaboynca 07-27-2016 10:10 PM

Re: What did you do with your truck today, Part 3
 
Alright! :metal:
Up to 3!!! Oh yeah i tried to cook an egg on my truck w/the 106 F heat...not so much luck...

my56chevytruck 07-28-2016 12:04 AM

Re: What did you do with your truck today, Part 3
 
phew, I started mine, made a rum and coke and listened to it purr. Then went back in the house to the AC. :metal:

MiraclePieCo 07-28-2016 03:52 AM

Re: What did you do with your truck today, Part 3
 
I removed my stock non-functioning gas gauge. It used to work, now it stopped. Not sure how to test it, but for $57 (Classic Parts) I'll just buy a new 12-volt unit.

ChuckDriver 07-31-2016 01:06 PM

Re: What did you do with your truck today, Part 3
 
Here are a couple of videos to compare the sound difference between my Flowmaster Super 40s and the newly installed Black Widow Exhaust Venoms.

https://www.youtube.com/watch?v=zrjKKxVke1Q

https://www.youtube.com/watch?v=MpDibidhYsA

:uhmk:

my56chevytruck 08-09-2016 10:14 PM

Re: What did you do with your truck today, Part 3
 
I sure llike those Black Widow venoms.

MiraclePieCo 08-10-2016 04:38 AM

Re: What did you do with your truck today, Part 3
 
2 Attachment(s)
Last week I got my gas gauge functioning - what a relief! Next I needed to address the heating issues I have at freeway speed (indicating an airflow deficiency).

I removed the old Chevy Cavalier 14" electric fan that was in my truck when I bought it (4-cylinder fan - pathetic!) and installed a Spal 16" high-performance unit. I've used this model before - they pull about four times the air of a cheapo fan. Ha ha, I should be able to throw my truck in neutral and the fan will pull me down the road like an airplane propeller!

I also removed the fan shroud that was in the truck. The shroud actually blocks much of the radiator, restricting airflow at speed by forcing all the air through the relatively small fan opening (see illustration below in case I haven't clarified this). Now I have unobstructed airflow front and rear through the radiator!

It's going to be in the mid-90's all week, a good time to test it out.

b-mac 08-12-2016 07:24 AM

Re: What did you do with your truck today, Part 3
 
I'll be interested to see which way works better with your radiator. I used to try to run an electric on my "Hot Rod" 2.2 S10. It wouldn't keep it cool without a shroud. Ended up modifying my stock shroud and mounting the electric fan a few inches from the radiator.

MiraclePieCo 08-15-2016 04:02 AM

Re: What did you do with your truck today, Part 3
 
2 Attachment(s)
Ongoing improvements to my '50. Today, door weatherstripping - Frost King self-adhesive from my local home improvement store. 10-minute installation. I'm hoping it will make a big reduction in wind noise.

MiraclePieCo 08-15-2016 04:13 AM

Re: What did you do with your truck today, Part 3
 
Quote:

Originally Posted by b-mac (Post 7681026)
I'll be interested to see which way works better with your radiator. I used to try to run an electric on my "Hot Rod" 2.2 S10. It wouldn't keep it cool without a shroud. Ended up modifying my stock shroud and mounting the electric fan a few inches from the radiator.

Underhood airflow dynamics can be weird. I've seen some guys install flaps in their shrouds that open at speed to allow airflow, then suck closed when the fan activates.

I'll be driving the truck this weekend. It's supposed to be 102* and I have three 6% mountain passes to climb, so I'll report back on how it does.

cyclonewade 08-18-2016 05:04 PM

Re: What did you do with your truck today, Part 3
 
1 Attachment(s)
Do tires count?

MiraclePieCo 08-19-2016 04:57 PM

Re: What did you do with your truck today, Part 3
 
Quote:

Originally Posted by cyclonewade (Post 7687264)
Do tires count?

Yep - nice!

tsmith8 08-19-2016 09:05 PM

Re: What did you do with your truck today, Part 3
 
Quote:

Originally Posted by MiraclePieCo (Post 7683597)
Ongoing improvements to my '50. Today, door weatherstripping - Frost King self-adhesive from my local home improvement store. 10-minute installation. I'm hoping it will make a big reduction in wind noise.

did it make a difference?

cyclonewade 08-21-2016 08:54 PM

Re: What did you do with your truck today, Part 3
 
First drive.

https://youtu.be/lFdxR-IfFmw

my56chevytruck 08-21-2016 09:16 PM

Re: What did you do with your truck today, Part 3
 
1 Attachment(s)
Aside for going for a cruise, I put a new lokar shifter in the truck, along with the boot and chrome ring.

my56chevytruck 08-21-2016 09:17 PM

Re: What did you do with your truck today, Part 3
 
Quote:

Originally Posted by cyclonewade (Post 7690137)

that's great, nice looking ride as well.

MiraclePieCo 08-22-2016 04:14 AM

Re: What did you do with your truck today, Part 3
 
1 Attachment(s)
Quote:

Originally Posted by tsmith8 (Post 7688392)
did it make a difference?

Finally took the truck for a test drive after all the stuff I've fixed lately. It all worked better than I'd hoped!

Door weatherstripping: The Frost King self-adhesive weatherstrip significantly reduced wind noise and door rattles, while still allowing the doors to shut more easily than they ever have. Success!

Gas gauge: What a relief to have a working gas gauge! New sender, new gauge, finally I was able to get it functioning by removing a weird inline resistor wire on the hot wire. Success!

Freeway overheating. I suspected that my fan shroud was actually restricting airflow at highway speed. I removed it and sure enough, I can now go over 6% mountain passes at 100* outside temperature and the gauge climbs only to about 190. After that my new bigass Spal fan takes over. Success!

Details of all the above can be found in previous installments of this thread. Here's a pic of what I got to enjoy today, a working gas gauge and a centered temp gauge (please pardon the '54 gauges in a '50 dash). And just listen to how quiet it is ;-)

MiraclePieCo 08-22-2016 04:29 AM

Re: What did you do with your truck today, Part 3
 
Quote:

Originally Posted by cyclonewade (Post 7690137)

Congratulations - looks great! Don't loose those fenders out the back with no tailgate!

nvrdone 08-22-2016 09:57 AM

Re: What did you do with your truck today, Part 3
 
if you have a 6 volt gage on a 12 volt system you need that in line resistor. its a voltage drop.

MiraclePieCo 08-22-2016 06:30 PM

Re: What did you do with your truck today, Part 3
 
Quote:

Originally Posted by nvrdone (Post 7690551)
if you have a 6 volt gage on a 12 volt system you need that in line resistor. its a voltage drop.

Cool - thanks! Never seen one like it before.

dirty dish 08-30-2016 12:06 AM

Re: What did you do with your truck today, Part 3
 
1 Attachment(s)
Attachment 1565996finally got tires mounted and put on had to mount them by hand wouldn't fit on tire machine

OrrieG 08-30-2016 11:10 AM

Re: What did you do with your truck today, Part 3
 
Quote:

Originally Posted by nvrdone (Post 7690551)
if you have a 6 volt gage on a 12 volt system you need that in line resistor. its a voltage drop.

stovebolts.com has a great tech article on converting from 6 to 12 volts. Can't link it on my phone.

ChuckDriver 08-30-2016 02:52 PM

Re: What did you do with your truck today, Part 3
 
2 Attachment(s)
Picked up my new door panel inserts! :uhmk:

CATMdude45 08-30-2016 05:54 PM

Re: What did you do with your truck today, Part 3
 
Interesting...... my gauges on my 52 are opposite, don't know if the PO messed it up.....what side is the speedo suppose to be on?




Quote:

Originally Posted by MiraclePieCo (Post 7690416)
Finally took the truck for a test drive after all the stuff I've fixed lately. It all worked better than I'd hoped!

Door weatherstripping: The Frost King self-adhesive weatherstrip significantly reduced wind noise and door rattles, while still allowing the doors to shut more easily than they ever have. Success!

Gas gauge: What a relief to have a working gas gauge! New sender, new gauge, finally I was able to get it functioning by removing a weird inline resistor wire on the hot wire. Success!

Freeway overheating. I suspected that my fan shroud was actually restricting airflow at highway speed. I removed it and sure enough, I can now go over 6% mountain passes at 100* outside temperature and the gauge climbs only to about 190. After that my new bigass Spal fan takes over. Success!

Details of all the above can be found in previous installments of this thread. Here's a pic of what I got to enjoy today, a working gas gauge and a centered temp gauge (please pardon the '54 gauges in a '50 dash). And just listen to how quiet it is ;-)


oldtrucks617 08-30-2016 09:41 PM

Re: What did you do with your truck today, Part 3
 
I picked up my newly rebuilt LS1,came out of a 1999 SS salvage.Trying to make lemonaid out of LEMONS..Know what I mean ?? going into my 57 GMC..Cali truck..they don't last around here,RUST,THIEVES.....4L60E auto is my best option,and all i have..PCM it and i'm good to go....pics in a few weeks.

tsmith8 09-01-2016 08:50 AM

Re: What did you do with your truck today, Part 3
 
1 Attachment(s)
All last winter i worked on the truck after i bought it to get it ready for summer. Then i spent the summer fixing all the unknown issues so it would operational to the point i could drive it and enjoy it.

This week i have put more miles on it than i have in the last three months and i love it. Stopped in at my favourite coffee shop yesterday and snapped this pic.

lynx5653 09-02-2016 04:02 PM

Re: What did you do with your truck today, Part 3
 
truck looks real nice.

I have been driving our 55 for most of the week and so far no major problems, lots of rattles and such but it goes down the road nice. Had the front end rebuilt, new rear springs, new seats, had the 700r4 hooked up properly seems to be working ok. no pics yet will try this weekend.

capnduane 09-04-2016 01:51 PM

Re: What did you do with your truck today, Part 3
 
2 Attachment(s)
Got an new set of aluminum valve covers off the guys at "The Speed Shop" on ebay. Came with gaskets, allen bolts and grommets. I had a inexpensive chrome set on the engine for the last 3 years, and they never did seal correctly. These should seal up better and look good as well!

Thesilverfox 09-09-2016 11:41 PM

Re: What did you do with your truck today, Part 3
 
Installed engine and tranny to see what I have to do with the cab

http://img.photobucket.com/albums/v2...psy88fmyep.jpg

Thesilverfox 09-10-2016 12:45 AM

Re: What did you do with your truck today, Part 3
 
double posted

oldtrucks617 09-10-2016 02:43 PM

Re: What did you do with your truck today, Part 3
 
Quote:

Originally Posted by Thesilverfox (Post 7708737)
Installed engine and tranny to see what I have to do with the cab

http://img.photobucket.com/albums/v2...psy88fmyep.jpg

Wow,Sweet looking LS engine,superclean frame...nice work,please keep us all posted..I'm jealous .....lol

lynx5653 09-10-2016 07:01 PM

Re: What did you do with your truck today, Part 3
 
I fixed my taillight and turn signal problem, installed new side mirrors, new headlight. Lots more to do but getting there.

Thesilverfox 09-11-2016 10:58 PM

Re: What did you do with your truck today, Part 3
 
Quote:

Originally Posted by oldtrucks617 (Post 7709074)
Wow,Sweet looking LS engine,superclean frame...nice work,please keep us all posted..I'm jealous .....lol

Thanks man, mission accomplished. Pictures might not show but it actually turned out really good . It tried to makes curves in the firewall kind of original looking.

http://img.photobucket.com/albums/v2...s4vvgp5xw.jpeg

http://img.photobucket.com/albums/v2...sqv6g6rhy.jpeg

OrrieG 09-13-2016 04:12 PM

Re: What did you do with your truck today, Part 3
 
Been doing final body work so I can shoot the blocking primer (again). Last night while removing back fender it got away from me and I dropped in on the only part of the spear that I had not had to work on. Could have cried, getting that crease right has been a major hassle, now I get to do it some more.

OrrieG 09-16-2016 09:16 PM

Re: What did you do with your truck today, Part 3
 
2 Attachment(s)
Here are the parts primed, dents in bed side don't look as bad painted, easy fix.

Midge725 09-17-2016 11:35 AM

Re: What did you do with your truck today, Part 3
 
1 Attachment(s)
Took the old gal to her first drivein! it was an awesome time.

my56chevytruck 09-17-2016 10:48 PM

Re: What did you do with your truck today, Part 3
 
Quote:

Originally Posted by OrrieG (Post 7715319)
Here are the parts primed, dents in bed side don't look as bad painted, easy fix.

Looks like good body work. keep it going.

my56chevytruck 09-17-2016 10:52 PM

Re: What did you do with your truck today, Part 3
 
Quote:

Originally Posted by tsmith8 (Post 7700905)
All last winter i worked on the truck after i bought it to get it ready for summer. Then i spent the summer fixing all the unknown issues so it would operational to the point i could drive it and enjoy it.

This week i have put more miles on it than i have in the last three months and i love it. Stopped in at my favourite coffee shop yesterday and snapped this pic.

Looks really nice. I like the black and white a lot. very cool.

1958Warrior 09-18-2016 12:12 PM

Re: What did you do with your truck today, Part 3
 
Bought it ,a 1959, So now my 58 step side will have a sibling rivalry. Had to just put it in storage for the time being, till I get the 58 on the road. Plus ,with storage fees at $160 mo. , a little motivation to get the 58 legal, City code inspector would be like a kid in a candy store if he saw two of them sitting in the driveway.

http://dallas.craigslist.org/ndf/cto/5777248162.html


[IMG]http://67-72chevytrucks.com/gallery/...fleetside1.jpg[/IMG]

[IMG]http://67-72chevytrucks.com/gallery/..._fleetside.jpg[/IMG]
[IMG]http://67-72chevytrucks.com/gallery/...fleetside5.jpg[/IMG]

lynx5653 09-18-2016 10:09 PM

Re: What did you do with your truck today, Part 3
 
4 Attachment(s)
WE insulated cab interior, installed new seats out of an 03 silverado, installed new hinges and a few missing bolts here there


All times are GMT -4. The time now is 11:51 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com