The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (http://67-72chevytrucks.com/vboard/index.php)
-   projects and builds 88-98 (http://67-72chevytrucks.com/vboard/forumdisplay.php?f=200)
-   -   6 Door GMT400 88-99 (http://67-72chevytrucks.com/vboard/showthread.php?t=751972)

KIDHLR 12-05-2017 11:55 PM

6 Door GMT400 88-99
 
1 Attachment(s)
Hey all, been a while since Iíve posted anything on here. I sold the KIDHLR truck I build and Iím looking to build a 6 Door version of a gmt400. Right now it looks like it will probably be a 99 k2500 with a 6.5 turbo diesel. Iíve found some pictures of 6door suburbans of this bodystyle and a few long beds but Iím not finding any pictures of 6 Door short beds out there. Anybody on here seen this conversion before?
Posted via Mobile Device

chris@bigjranch.com 12-06-2017 12:00 AM

Re: 6 Door GMT400 88-99
 
I guess I logged into the wrong profile. Iím planning on doing the stretch with the red crew cab pictured. Also have a 93 crew cab that weíre cutting up.
Posted via Mobile Device

Terrick down Under 12-06-2017 07:03 AM

Re: 6 Door GMT400 88-99
 
Let the cutting begin. I'm ready!

chris@bigjranch.com 12-13-2017 04:20 PM

Re: 6 Door GMT400 88-99
 
5 Attachment(s)
Here are some pictures of getting it cut apart!

chris@bigjranch.com 12-13-2017 04:46 PM

Re: 6 Door GMT400 88-99
 
2 Attachment(s)
Ah....... Memories!

Terrick down Under 12-14-2017 01:35 AM

Re: 6 Door GMT400 88-99
 
Great start

chris@bigjranch.com 12-17-2017 04:13 PM

Re: 6 Door GMT400 88-99
 
3 Attachment(s)
Got it back to a rolling chassis today! Next step is to start cutting cabs apart!

Terrick down Under 12-21-2017 04:59 PM

Re: 6 Door GMT400 88-99
 
So do you think that you will get much done over the Christmas break?

chris@bigjranch.com 12-22-2017 04:42 PM

Re: 6 Door GMT400 88-99
 
5 Attachment(s)
Well........ letís see.......:-)

chris@bigjranch.com 12-22-2017 04:45 PM

Re: 6 Door GMT400 88-99
 
5 Attachment(s)
Here are some more from Monday.

chris@bigjranch.com 12-22-2017 04:48 PM

Re: 6 Door GMT400 88-99
 
5 Attachment(s)
And some from Wednesday

chris@bigjranch.com 12-22-2017 04:56 PM

Re: 6 Door GMT400 88-99
 
Right now itís just sitting together. The drive shaft is in, so I could move it around the yard. However, there is more fit and finish that needs to be done before I feel I can take it down the road :-) probably wonít have much time to do more until the first of the year, but I wanted to push hard while the weather cooperated to get a nice visual representation of what I was going after. Iím a little excited right now, as itís turning out just as I had envisioned!

Terrick down Under 12-22-2017 09:38 PM

Re: 6 Door GMT400 88-99
 
Well........"I’m a little excited right now, as it’s turning out just as I had envisioned!
"...........
...looks bloody great to me. I thought by the way you were talking that you might get the chassis finished by the end of the holidays. Man, you'll be buffing paint real soon.

Palf70Step 12-24-2017 10:41 AM

Re: 6 Door GMT400 88-99
 
Looks good so far. I liek watching you guys make these super long trucks!


All times are GMT -4. The time now is 07:27 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com