thought I would share this
1 Attachment(s)
For you guys hooking up a hei and a aftermarket tach if you search out square bodys in the jy some have this hei hot wire connector that has the tach side of the plug all in one.
I've used these in the trucks I put together for myself just for a clean look and a secure connection on both terminals. I have seen cheap terminals come loose on hei and cause problems. It won't happen with this. These do have two wires coming off the tach side but one is easily snipped off close too the terminal with no problems, Solder it all in and run. |
Re: thought I would share this
Great tip, Thanks. VV
|
Re: thought I would share this
Quote:
Thanks they do work quite nice. |
Re: thought I would share this
Thanks for the tip. I'm going to be on the lookout for one on my next salvage yard trip.
|
All times are GMT -4. The time now is 06:39 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com