Trim rings depth for 15x8 Rally wheels
I see multiple sizes available and I thought the 3" would probably look best but wanted some input from you guys.
|
Re: Trim rings depth for 15x8 Rally wheels
Bump
|
Re: Trim rings depth for 15x8 Rally wheels
If and I say if, you could find asset of 56 caddy hubcaps and remove the center part of the cap, that makes a killer looking deep dish style trim ring.
Sorry I don't have pic's to show, all was destroyed in 2012 shop fire.. |
Re: Trim rings depth for 15x8 Rally wheels
I have 3" on mine and like the way that they look.
|
Re: Trim rings depth for 15x8 Rally wheels
I put these on my 71 and they look great. Can post a pick if you like.
https://www.summitracing.com/parts/upd-a6140 Smitty |
Re: Trim rings depth for 15x8 Rally wheels
I picked up a set off of eBay, made in Taiwan. Complete junk. They will be getting returned. When you put yours in with them being 3 inches, is there a gap between the inner edge of the trim ring and the actual wheel, these eBay ones have that Gap not sure if that's normal
|
Re: Trim rings depth for 15x8 Rally wheels
2 Attachment(s)
I have had these on and off on my truck and they are pretty good. Gap is normal from what I have seen.
Smitty |
Re: Trim rings depth for 15x8 Rally wheels
Seems like debris would get behind there. I have a set that came on my steelies 1 and 1/2 inches which sit tighter to the rim
|
All times are GMT -4. The time now is 12:23 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com