The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 5 of 8

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)

- - Interest in aluminum hub knobs? (https://67-72chevytrucks.com/vboard/showthread.php?t=685310)

CUSTOM/10

02-07-2016 10:38 AM

Re: Interest in aluminum hub knobs?

I have a yellow one I could send you, there the same other than the color & the blue 1/2 tons don't have spicer on them. I can send the chrome piece also so you have it for test fitting ! And I wouldn't need to get them back.

LMK
Gary

$20071k10

02-08-2016 10:29 AM

Re: Interest in aluminum hub knobs?

super winch makes blue D44 knobs http://libertytruckandauto.com/images/parts/400518.JPG

$20071k10

02-08-2016 10:30 AM

Re: Interest in aluminum hub knobs?

superwinch makes blue D44 knobs http://libertytruckandauto.com/images/parts/400518.JPG

don't know why this double posted!

nvrenuf

02-08-2016 12:19 PM

Re: Interest in aluminum hub knobs?

Superwinch makes hubs with blue knobs, they don't make replacement blue knobs for Spicer hubs (which is what the custom knobs in this thread are for).

CUSTOM/10

02-09-2016 07:07 PM

Re: Interest in aluminum hub knobs?

The 1/2 ton spicer hub dial is headed your way !

Gary

$20071k10

02-09-2016 08:13 PM

Re: Interest in aluminum hub knobs?

Quote:

Originally Posted by nvrenuf (Post 7478264)

Superwinch makes hubs with blue knobs, they don't make replacement blue knobs for Spicer hubs (which is what the custom knobs in this thread are for).

Yes tds makes a replacement aluminum knob, they don't make replacement blue knobs for Spicer hubs ( which is what this custom knobs thread is for)

nvrenuf

02-09-2016 08:30 PM

Re: Interest in aluminum hub knobs?

Quote:

Originally Posted by $20071k10 (Post 7480237)

Yes tds makes a replacement aluminum knob, they don't make replacement blue knobs for Spicer hubs ( which is what this custom knobs thread is for)

I know about the TDS knobs and the purpose of this thread. My post was about Superwinch not making replacement knobs (re: your post).

What I'd really like to see made is the chrome bezel for Spicer hubs (specifically, for D60's).

Russ33

02-11-2016 11:15 PM

Re: Interest in aluminum hub knobs?

I just heard of these from Undertaker. Please let me know if you still have a set available for 1972 dana 44 3/4 ton. Thank you,Russ

gmc 2500 4x4

02-12-2016 06:29 AM

Re: Interest in aluminum hub knobs?

i need to say thank you for a great set of dials! nice work, paul

GMCGrim

02-12-2016 08:37 AM

Re: Interest in aluminum hub knobs?

Thanks Paul

GMCGrim

02-12-2016 08:39 AM

Re: Interest in aluminum hub knobs?

Quote:

Originally Posted by Russ33 (Post 7482966)

I just heard of these from Undertaker. Please let me know if you still have a set available for 1972 dana 44 3/4 ton. Thank you,Russ

I should have more by the end of next week. I will notify you when they arrive.

72 paul

02-12-2016 10:10 AM

Re: Interest in aluminum hub knobs?

Will step in line for a 1/2 ton set Paul.

GMCGrim

02-12-2016 04:59 PM

Re: Interest in aluminum hub knobs?

Quote:

Originally Posted by 72 paul (Post 7483310)

Will step in line for a 1/2 ton set Paul.

The half ton ones are several weeks out, I just received the prototype in the mail. But I will let everyone know when they are ready.

El Dorado Jim

02-20-2016 02:02 AM

Re: Interest in aluminum hub knobs?

Quote:

Originally Posted by argonaut (Post 7394178)

I just bought new stainless steel socket head 3/8"-16 bolts for mine. I'm sure they were a lot less than $10/bolt. I do have two sets of original bolts too. Are these from quad4x4 actually OEM bolts or just replacements??

you can research this for yourself, but I was at a fastener place today , and the guy said that stainless steel bolts are not very strong, I am going to use my original bolts.

El Dorado Jim

02-20-2016 02:05 AM

Re: Interest in aluminum hub knobs?

Quote:

Originally Posted by GMCGrim (Post 7394501)

You are right, they do have a square profile and the ones from 4x4 tech are the originals but he has a limited amount of them for a premium price. I went to a place that rebuilds hydraulic cylinders and bought some from them that are the same dimension and close to the same profile. They fit very well.

Hi Bruce, can you find out which O rings or whatever you used,(dimensions) I am having trouble finding anything that will work, thanks, Jim

enigma

02-20-2016 10:56 AM

Re: Interest in aluminum hub knobs?

im in line for a set for the half ton ones when they come in!!!!!
Please

GMCGrim

02-20-2016 11:18 AM

Re: Interest in aluminum hub knobs?

Quote:

Originally Posted by El Dorado Jim (Post 7492594)

Hi Bruce, can you find out which O rings or whatever you used,(dimensions) I am having trouble finding anything that will work, thanks, Jim

Jim, I have some that will work in addition to some originals. I need to find the part number for the new ones. I bought them at a place that repairs hydraulic cylinders. I will send you the info.

undertaker72

02-20-2016 01:05 PM

Re: Interest in aluminum hub knobs?

Quote:

Originally Posted by GMCGrim (Post 7492817)

Jim, I have some that will work in addition to some originals. I need to find the part number for the new ones. I bought them at a place that repairs hydraulic cylinders. I will send you the info.

if you could forward me that part number also thanks kevin

El Dorado Jim

02-20-2016 03:33 PM

Re: Interest in aluminum hub knobs?

Thanks Bruce, I went to a hydraulic shop and they couldn't find anything that would work

GMCGrim

02-21-2016 03:54 PM

Re: Interest in aluminum hub knobs?

The company where I got the seals is American Seal Co 3528 E Desmet Spokane Wa 99202. 509-534-0455. Part HRU18-250-18.
Again these have the same dimensions as the originals but not the same profile but it is close.

El Dorado Jim

02-22-2016 10:07 PM

Re: Interest in aluminum hub knobs?

Quote:

Originally Posted by GMCGrim (Post 7494176)

thanks Bruce

aotte1

03-01-2016 04:24 PM

Re: Interest in aluminum hub knobs?

Interested in a set of the 3/4 ton blue ones.

Les

undertaker72

03-01-2016 10:59 PM

Re: Interest in aluminum hub knobs?

jim , is you machinist in Montana

Ol Blue K20

03-02-2016 05:36 PM

Re: Interest in aluminum hub knobs?

My hub dials just arrived!! They're nice.....very nice. Thanks Bruce!

GMCGrim

03-03-2016 08:30 AM

Re: Interest in aluminum hub knobs?

Quote:

Originally Posted by Ol Blue K20 (Post 7506744)

My hub dials just arrived!! They're nice.....very nice. Thanks Bruce!

Thanks Dale, I am glad that you like them.

All times are GMT -4. The time now is 03:06 AM.

Page 5 of 8

Show 40 post(s) from this thread on one page