Pics of 2 or 2.5 and 4 inch drop
I ordered 2.5 inch drop spindles and 4 inch drop springs for the back of my truck from Early Classic last night. Does anyone have pictures of what this will look like installed? Probably should have found some pics before I placed the order but Bud Light said what the hell just order it already.
|
Re: Pics of 2 or 2.5 and 4 inch drop
LWB or SWB?
|
Re: Pics of 2 or 2.5 and 4 inch drop
heres a pic of mine and its on a 3" and 5" or close and i would like to raise the back of mine a little but this might give you an ideahttp://i718.photobucket.com/albums/w...intgmc/248.jpg
|
Re: Pics of 2 or 2.5 and 4 inch drop
Early Classics website shows examples of trucks with various drops.
|
Re: Pics of 2 or 2.5 and 4 inch drop
+1 on the early classic samples!!!
|
Re: Pics of 2 or 2.5 and 4 inch drop
|
Re: Pics of 2 or 2.5 and 4 inch drop
2 Attachment(s)
I have ECE 2.5/4-inch drop on my SWB. All new springs along with all of the suspension was rebuilt. I recommend it, while you have it apart. Here's a side pix. Front view is on my avatar. The red rallye wheel pix is from a year ago. The aluminum wheel pix is from seven years ago, but is a better view from the side.
|
Re: Pics of 2 or 2.5 and 4 inch drop
1 Attachment(s)
here's mine...68 swb
|
Re: Pics of 2 or 2.5 and 4 inch drop
Awesome pictures, mine is a long bed but that height looks perfect. I wanted to make sure I could still use it as a truck. Any lwb pictures?
|
Re: Pics of 2 or 2.5 and 4 inch drop
Check the ECE link above... they have photos of a LWB truck on there with various drops.
|
Re: Pics of 2 or 2.5 and 4 inch drop
2x4 drop on my 67 Long Bed... Want to go to 3.5x5 (spindles and one inch springs, and Five in back) or airbags. Good Luck.
http://www.thoraldus.com/gallery2/ma...serialNumber=1 |
Re: Pics of 2 or 2.5 and 4 inch drop
1 Attachment(s)
Here's my LWB with the exact set up you are looking for; 2.5" spindle and 4" rear w/ relocation kit all from ECE.
|
Re: Pics of 2 or 2.5 and 4 inch drop
2.5" spindles, 1" springs-- 4" springs in rear
http://i37.photobucket.com/albums/e7...uck2/Truck.jpg |
Re: Pics of 2 or 2.5 and 4 inch drop
[QUOTE=fleetimus;3061360]2.5" spindles, 1" springs-- 4" springs in rear.QUOTE]
That looks like more than 4-inches lower in the rear. More like 6-inches in my opinion...maybe the wifes'..... |
Re: Pics of 2 or 2.5 and 4 inch drop
OlecBlue 68, What tire & wheel size with that drop . Thanks
|
Re: Pics of 2 or 2.5 and 4 inch drop
Quote:
|
Re: Pics of 2 or 2.5 and 4 inch drop
3 Attachment(s)
Quote:
See attached photo. Comments/thoughts?? Thanks. Robert PS not to meant to steal the post. |
Re: Pics of 2 or 2.5 and 4 inch drop
1 Attachment(s)
Quote:
It’s an old thread but I had no luck finding 2/4 drop photo so here’s my rear picture. Will post front when it’s done.Attachment 1758904 CPP lowering coils kit with shocks. No notch needed. 17” AR wheels. |
Re: Pics of 2 or 2.5 and 4 inch drop
I'm looking at just doing the 2-4 coil drop kit from ECE as well. I don't mind it's an old thread, I'd like to see the 2/4 pics.
Thanks for posting! |
Re: Pics of 2 or 2.5 and 4 inch drop
2 Attachment(s)
Quote:
|
Re: Pics of 2 or 2.5 and 4 inch drop
1 Attachment(s)
[ATTACH]Attachment 1762732[/ATTACH]
Quote:
Here’s front and rear 2/4 |
Re: Pics of 2 or 2.5 and 4 inch drop
1 Attachment(s)
Flip fa ya...
|
Re: Pics of 2 or 2.5 and 4 inch drop
1 Attachment(s)
2/4 ece
|
Re: Pics of 2 or 2.5 and 4 inch drop
1 Attachment(s)
My old '69. 2/4 McGaughy springs. The McGaughy springs in my experience usually sit a little lower than some other springs. A friend of mine bought CPP 2/4 springs the same time I bought these, and his truck say a solid inch higher than mine did.
|
Re: Pics of 2 or 2.5 and 4 inch drop
1 Attachment(s)
Another shot
|
All times are GMT -4. The time now is 06:23 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com