|
Dirty Dingo Crossmember Problem
2 Attachment(s)
Dont know if im doing something wrong,but i have a big gap were the bracket bolts on to the frame...if i bolt it on the bracket it leans to the back on both sides,They should be straight right?
|
Re: Dirty Dingo Crossmember Problem
2 Attachment(s)
Ok had bracket on wrong..one would figure the sloted bracket is for the brake line but it not.
|
Re: Dirty Dingo Crossmember Problem
1 Attachment(s)
Done.
|
Re: Dirty Dingo Crossmember Problem
how do you like the overall fit and finish of it? i like the idea of east access to the oil pan while running an LS. did you keep the stock mounting location, or move it forward/backward?
|
Re: Dirty Dingo Crossmember Problem
1 Attachment(s)
Keeping it on the stock location...its a nice piece well fabricated.
|
Re: Dirty Dingo Crossmember Problem
2 Attachment(s)
Done
|
Re: Dirty Dingo Crossmember Problem
1 Attachment(s)
done.
|
Re: Dirty Dingo Crossmember Problem
Any pictures of the motor in place?
|
Re: Dirty Dingo Crossmember Problem
2 Attachment(s)
Yes
|
Re: Dirty Dingo Crossmember Problem
That's impressive, nice work
|
Re: Dirty Dingo Crossmember Problem
http://67-72chevytrucks.com/vboard/s...d.php?t=704966 Thank you here is my build took about 5 months.
|
| All times are GMT -4. The time now is 10:26 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com