Fleetside bed floor patch panels
 

I don't have large sections, maybe 12" L x 24" W. Also have SWB sides but not much left of them. Front panel is decent, has rust-through on bottom flange in a couple places. Patches $20-up depending on size, front panel $50, all plus shipping. Let me know what you need.

Re: Fleetside bed floor patch panels
 

Passenger side bedside from the marker light back the whole tail light area is that section good and how much if you would cut it

Re: Fleetside bed floor patch panels
 

Sorry, both of the taillight areas are dented/rusted. There is a pair for sale here on the board.

Re: Fleetside bed floor patch panels
 

Thank you for the reply. I seen those after I message you.

Re: Fleetside bed floor patch panels
 

I need some bed floor patches. What size panels do you have available? I need a piece to repair the rear section of floor by the tailgate and a couple other pieces for in front of the wheel tubs. I have no problem splicing patches together to make one good one. This isnt a show truck. What ever sizes are easier to ship. Thanks much, Bob

Re: Fleetside bed floor patch panels
 

Bob, I will check and see if I have some good pieces this evening and let you know.

Thanks,
Mark

Re: Fleetside bed floor patch panels
 

I'm looking for an 8"x8" patch

Re: Fleetside bed floor patch panels
 

Thanks Mark. I will look forward to hearing what you have.

Re: Fleetside bed floor patch panels
 

Bob I didn't get pics last night, it was raining, but I will tonight.

Re: Fleetside bed floor patch panels
 

What area, or does it matter?

Re: Fleetside bed floor patch panels
 

I'm looking for one or two patchs that included the end of a raised rib. I'll yry to get you a picture of what i need. Dave

Re: Fleetside bed floor patch panels
 

tallbob the front of the wheel well areas are both shot. What part did you need at the rear of the floor?

Re: Fleetside bed floor patch panels
 

The last 6" across the full width of the rear of the bed floor. Seems like a common area where most rust damage occurs.

Re: Fleetside bed floor patch panels
 

Unfortunately that part is shot as well

Re: Fleetside bed floor patch panels
 

Do you have a section of the floor that I could use for just general patching? Say 18"x30" or so? Thanks

Re: Fleetside bed floor patch panels
 

Maybe 12 x 24 but not 18

Re: Fleetside bed floor patch panels
 

I can make that work. Do you have access to just one or is two pieces possible?

Re: Fleetside bed floor patch panels
 

I have 2 pieces, I will check them out after work and post pics if it's not raining.

Re: Fleetside bed floor patch panels
 

Let me know what area of the floor, I can cut a piece.

Re: Fleetside bed floor patch panels
 

Dave, did you get a pic?

Re: Fleetside bed floor patch panels
 

I'm interested in a "middle of the bed" or close, floor patch. Just want it to be relatively straight and without major pitting.

Re: Fleetside bed floor patch panels
 

What size patch do you need?

Re: Fleetside bed floor patch panels
 

I took some pics of the pieces I have, I will post them tomorrow, it keeps telling me a security token is missing when I try to post from my phone.

Re: Fleetside bed floor patch panels
 

That message means you need to resize your images (make them smaller). Somewhere on the forum they give recommended sizes. I open my images with one of the MS apps and resize to "web large". In regard to the patch, a 12"x12" or slightly larger will work.

Re: Fleetside bed floor patch panels
 

Here are some pics of the first 2 pieces that I have guys. Let me know what will work for you and what size and give me zip codes and I can get shipping quotes.
More pics to follow. See the tape measure for sizes. Sorry for the quality of the pics, had to resize them to get them to upload.