1973-1987 Maroon/Burgundy Bench Seat Restored/Rebuilt
5 Attachment(s)
Restored bench seat with new Maroon Vinyl/Burgundy Velour Deluxe cover. Original foam was used with a rebuild kit. Frame & tracks were sandblasted and repainted. Tracks lubed for better slide. New Hinge Garnishes with new screws.
This seat is original for the 81-87, but it will fit in any 73-87 Chevy or GMC Truck. Pickup is preferred but I can ship. Shipping average is about $200 due to size, weight and distance. Cover was just installed, so once the seat is in the truck with the heat of the sun, the vinyl will tighten up and the wrinkles will disappear. $600 plus shipping |
Re: 1973-1987 Maroon/Burgundy Bench Seat Restored/Rebuilt
awesome seat! great job
|
Re: 1973-1987 Maroon/Burgundy Bench Seat Restored/Rebuilt
Quote:
|
Re: 1973-1987 Maroon/Burgundy Bench Seat Restored/Rebuilt
That is a nice looking bench.
|
Re: 1973-1987 Maroon/Burgundy Bench Seat Restored/Rebuilt
Quote:
Thanks |
Re: 1973-1987 Maroon/Burgundy Bench Seat Restored/Rebuilt
5 Attachment(s)
Here is another seat I did in all Burgundy. But it was sold before I was even able to list it. And it was built using New Foam. It is sold and on its way overseas.
|
Re: 1973-1987 Maroon/Burgundy Bench Seat Restored/Rebuilt
It’s look great
|
Re: 1973-1987 Maroon/Burgundy Bench Seat Restored/Rebuilt
Quote:
|
Re: 1973-1987 Maroon/Burgundy Bench Seat Restored/Rebuilt
Anything in tan or saddle vinyl or leather?
|
Re: 1973-1987 Maroon/Burgundy Bench Seat Restored/Rebuilt
Quote:
http://67-72chevytrucks.com/vboard/s...&postcount=251 |
Re: 1973-1987 Maroon/Burgundy Bench Seat Restored/Rebuilt
Price lowered to $650 plus shipping
|
Re: 1973-1987 Maroon/Burgundy Bench Seat Restored/Rebuilt
Price lowered to $600 plus shipping
|
Re: 1973-1987 Maroon/Burgundy Bench Seat Restored/Rebuilt
Ttt
|
Re: 1973-1987 Maroon/Burgundy Bench Seat Restored/Rebuilt
sold
|
Re: 1973-1987 Maroon/Burgundy Bench Seat Restored/Rebuilt
4 Attachment(s)
I've got a middle seat that is this nice was recently redone before motor blew and he parted out. I've got both bottom flip forwards and both fold down backs all latches, bolts ,piano hinge seat belt rods. Was planning to put in my 66 burb but it will be to much to can a frame up for the front with all the other work I got on my plate, looking to get 600+ shipping for all, oh if someone acts fast I can get far back rear seat that's just as nice and will throw in for 100. Can't guarantee he still will have it after Tuesday because someone is going to pull parts off. Also have a light brown /tan buckets from 85 blazer they are 9 out of 10 no rips no tears have knobs to recline and lay flat, also have center console to match that set I repaired the cracks it had with hot knife and didn't need to be dyed but you could if you want. Asking $660 I've decided I want 1960-66 panel or delivery truck low back buckets or buddy club from 67-68 c10 for my burb. Also have nice roof rack off 85 burb I was gonna use on my 66 asking $250 obo have all screws mount pads and 3 center chrome strips for roof skin in middle , I think it's supposed to have 4 but one was gone, rear center bar has bend in it, I can try to straighten out, have 25 years body paint shop experience but can't guarantee outcome. But will do my best if asked. All prices are + shipping buyer pays all shipping we have Fastenal close by so I can drop off their if you line up all of the shipping and payment I can probably find a pilot and strap it down and all that if I need to if they don't offer that service willing to take partial trade for 6266 low back panel or delivery truck bucket seats or Buddy Club seat in any condition even pieces of Buddy Club seat need it for 66 Suburban or willing to take four Suburban seat only looking for front with jump seat and rear short seat not interested in third row for my Suburban don't need it that's the dog spot or willing to trade straight up for 292 inline six running motor looking for orig 60s carb to pan with radiator and hoses and 3 or 4 spd
|
Re: 1973-1987 Maroon/Burgundy Bench Seat Restored/Rebuilt
You really need to start your own thread.
|
All times are GMT -4. The time now is 09:25 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com