The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Vendors Marketplace (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=195)
-   -   IDIDIT Steering Column's Always Free shipping and on sale! (https://67-72chevytrucks.com/vboard/showthread.php?t=642583)

MCB Matt 09-08-2014 07:06 PM

IDIDIT Steering Column's Free shipping BEST PRICES! - I REFUSE TO SELL THE CHINA JUNK
 
I WILL NOT SELL THOSE CHEAP $200-300 CHINA JUNK COLUMN'S SOME OTHERS SELL! I KNOW WAY TOO MUCH ABOUT THEM AND HOW THEY ARE MADE AND HOW MANY FAIL AND WHAT'S DONE TO TRY TO FIX THEM... I VALUE MY STEERING A LITTLE TOO MUCH TO SAVE A FEW HUNDRED $$ IN A 5 FIGURE TRUCK BUILD! BUYER BEWARE!

IDIDIT column's are made in the USA and they are made to FIT THE VEHICLE YOU PURCHASE THEM FOR!!!

We are a Full Line direct dealer.

Just let us know what you need and we will quote it out for you!

Free shipping in the 48 states.

Forum Discounts!

Thanks
MCB

MCB Matt 09-11-2014 01:21 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Special - Through the End of September - HALF OFF POWDER COATING OR CHROME FINISH!!!

PM, Email or Call for your forum price, we will not be undersold on IDIDIT! We have been selling their column's longer than a lot of companies have been in business, they are top notch products and a great group of people for us to work with on the wholesale side!!

Let us know if you need Floor or Column shift, what finish and any accessories like the install kit, Cruise control, ect!

Thanks for helping keep us in IDIDIT's top dealer group!
MCB

MCB Matt 09-17-2014 02:58 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
The ONLY way to go!!

Don't run the CHEAP chine chrome column's guys... I have inside word from a direct importer that buys these by the CONTAINER load from china for $50ea...

They are crap, the turn signal switches usually fail within 500 miles and the bearings are horrible, tolerances and overall built quality is just not worth the savings...

This is FAR too important of a part to chance when you are crusing down the highway at 75 and the end snaps!!!

MCB

Woodnears 09-17-2014 09:40 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Pm me on an unfinished tilt non shift for a 68

MCB Matt 09-18-2014 12:46 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by Woodnears (Post 6847197)
Pm me on an unfinished tilt non shift for a 68

PM on the way!
Thanks
Matt

MCB Matt 09-24-2014 04:39 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Happy Hump Day!

MCB

MCB Matt 09-24-2014 07:52 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
:mm:

78f1hundo 09-25-2014 07:00 AM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
PM me on an unfinished tilt auto shift for a 65 C-10 & chrome price too...

Thanks

BB72CHEVKT 09-25-2014 10:41 AM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
unfinished with everything to install, please

MCB Matt 09-25-2014 01:05 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by 78f1hundo (Post 6855952)
PM me on an unfinished tilt auto shift for a 65 C-10 & chrome price too...

Thanks

PM sent!
Thanks
Matt

MCB Matt 09-25-2014 01:06 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by BB72CHEVKT (Post 6856085)
unfinished with everything to install, please

PM on the way!
Thanks
Matt

71meangreenc10 09-26-2014 10:32 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
PM for unfinished column tilt for 71.

Thanks,

Smitty

C10_ustacould 09-28-2014 12:01 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Unfinished, tilt, column shift for a 71 to 32578. Thanks

MCB Matt 09-29-2014 01:24 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by 71meangreenc10 (Post 6858052)
PM for unfinished column tilt for 71.

Thanks,

Smitty

PM on the way.
Thanks
Matt

MCB Matt 09-29-2014 01:27 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by Bucks68 (Post 6859340)
Unfinished, tilt, column shift for a 71 to 32578. Thanks

PM coming
Thanks
Matt

Cjwhite28 09-29-2014 01:47 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
would like to price out

Unfinished, tilt, column shift for a 71 shipped to 14303

Unfinished, tilt, floor shift for a 71 shipped to 14303

thanks

MCB Matt 09-29-2014 01:51 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by Cjwhite28 (Post 6860774)
would like to price out

Unfinished, tilt, column shift for a 71 shipped to 14303

Unfinished, tilt, floor shift for a 71 shipped to 14303

thanks

PM on the way!
Thanks
Matt

CG 09-29-2014 10:51 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Can you get these in paintable plain steel, tilt, and without column shift? I don't really want to have to pay extra for stainless or chrome.

68basket 09-29-2014 10:53 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Can you price a column for my 1960 chevy parkwood wagon. column shift, everything needed to install. I am unsure of any options etc.

MCB Matt 09-30-2014 02:20 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by CG (Post 6861457)
Can you get these in paintable plain steel, tilt, and without column shift? I don't really want to have to pay extra for stainless or chrome.

Yes, IDIDIT offers, plain (looks like brushed aluminum), Black powder coated, chrome, Brushed aluminum and polished aluminum.

Column or floor shift

Thanks
Matt

MCB Matt 09-30-2014 02:20 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by 68basket (Post 6861460)
Can you price a column for my 1960 chevy parkwood wagon. column shift, everything needed to install. I am unsure of any options etc.

Sure, PM on the way!
Thanks
Matt

CG 09-30-2014 09:55 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by MCB Matt (Post 6862091)
Yes, IDIDIT offers, plain (looks like brushed aluminum), Black powder coated, chrome, Brushed aluminum and polished aluminum.

Column or floor shift

Thanks
Matt

Hit me with a price on the plainest of plain Jane tilt, but no column shift units you have.

MCB Matt 10-01-2014 02:07 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by CG (Post 6862662)
Hit me with a price on the plainest of plain Jane tilt, but no column shift units you have.

PM on the way!
Thanks
Matt

BrentRS1985 10-01-2014 04:48 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
I'm interested in a chrome tilt column shift for my '69 c10. I don't know what options are available, please let me know.

MCB Matt 10-02-2014 12:44 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by BrentRS1985 (Post 6863663)
I'm interested in a chrome tilt column shift for my '69 c10. I don't know what options are available, please let me know.

PM on the way!
Thanks
Matt

N2TRUX 10-02-2014 12:50 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by MCB Matt (Post 6846703)
The ONLY way to go!!

Don't run the CHEAP chine chrome column's guys... I have inside word from a direct importer that buys these by the CONTAINER load from china for $50ea...

They are crap, the turn signal switches usually fail within 500 miles and the bearings are horrible, tolerances and overall built quality is just not worth the savings...

This is FAR too important of a part to chance when you are crusing down the highway at 75 and the end snaps!!!

MCB

Are you referring to columns sold on eBay or from another source? You seem adamant about the import columns, but your rather vague about the source.

MCB Matt 10-02-2014 01:15 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
PM sent!

full foot notch 10-03-2014 03:39 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
72 , shipping is to 34743

most likely tilt, but unsure of finish, its a black truck with touches of chrome. and then haven't decided if keeping column auto shift or switch to lokar floor auto trans shifter.

do they offer columns that are shortened towards the dash for us girthy fellows or just stock length ?

MCB Matt 10-03-2014 03:55 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by full foot notch (Post 6865974)
72 , shipping is to 34743

most likely tilt, but unsure of finish, its a black truck with touches of chrome. and then haven't decided if keeping column auto shift or switch to lokar floor auto trans shifter.

do they offer columns that are shortened towards the dash for us girthy fellows or just stock length ?

PM sent.
Thanks
Matt

MCB Matt 10-08-2014 03:20 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Happy hump day from sunny California!

MCB

MCB Matt 10-13-2014 06:06 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
It's nice to see orders coming in and many deciding their trucks are worthy of something more than a $200 cheapie junk column!!!

USA!

MCB

MCB Matt 10-16-2014 02:01 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
It's nice to see so many order's coming in for column's, stay with a GOOD USA made product.... Stay safe and avoid having to install your column 2-3 times because it keeps breaking!!

MCB

chubinit 10-21-2014 06:16 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Matt,
Please send shipped price on an unfinished tilt column for a 67 C20 automatic w/column shift (700r4 trans) and what's necessary to install. I'll be installing American Autowire universal kit if this helps any. Please let me know of any practical options that are available. I would love to have a 30" column to accommodate my over-sized mid-section. :O)
Thank you sir,
Chubinit

MCB Matt 10-21-2014 06:18 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Quote:

Originally Posted by chubinit (Post 6887488)
Matt,
Please send shipped price on an unfinished tilt column for a 67 C20 automatic w/column shift (700r4 trans) and what's necessary to install. I'll be installing American Autowire universal kit if this helps any. Please let me know of any practical options that are available. I would love to have a 30" column to accommodate my over-sized mid-section. :O)
Thank you sir,
Chubinit

Ok, PM on the way.
Thanks
Matt

MCB Matt 10-30-2014 12:47 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
:metal::metal::metal:

GO GIANTS!!! We are proud of our team winning a 3rd in 5!!! Amazing Pitching by our ACE!!!

Let's make some deals, we are feeling good here in Nor Cal today!!
MCB

sxtrail2 10-30-2014 09:43 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Hey Matt can i get a price on a paintable tilt column shift for my 69 thanks.
☆GIANTS☆

MCB Matt 11-03-2014 07:33 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Thank you all for the support.. All PM's are answered!!
Kim
MCB
925-828-5555

MCB Matt 11-12-2014 04:58 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Happy hump day from Sunny Ca!

As always, many sales and hundreds of brands available!

Buy with confidence... Top notch service, great prices and we are always here to answer the phone Mon-Fri 9-5 pacific... No Cell phones, leaving messages, ect!!!

We enjoy talking to our customers and helping with product selection and we can put together a package for anything from basic restoration parts to all out Suspension and brake packages!

Thank you all very much for the rapidly increasing business from members here.
MCB

MCB Matt 11-17-2014 02:28 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Happy Monday from MCB!

We are happy to report that we are getting to know a lot of you on the forum and are now supplying parts exclusively for several builds and direct to quite a few shops as well! Business has been steadily increasing here by almost 50% a week so a HUGE thanks to you guys out there :ennyd:

We have a lot to offer this community that is very unique around here. We are Pro-Touring specialists, anyone can sell stock restoration parts, which we do as well, everything A-Z!!

Our main focus is in the "FUN PARTS"... The stuff the truck's weren't available with stock... The Vintage Air Kits, Dakota Digital VHX dashes, LSx swap parts, Disc Brake kits, Suspension packages/parts, Smoked Glass kits, Wiring kits, Power Windows, High quality radios to fit the stock dash with stock style knobs but with Bluetooth wireless audio streaming and phone calls as well as Kick panels with affordable, high quality speakers, 3 point seat belt kits... The list goes on!!

Anything you need for your truck, Blazer, Suburban... Chances are MCB carries it at a great price and top notch customer service!

Thanks again, you guys rock :metal:
Matt + Kim
MCB

MCB Matt 11-27-2014 01:43 PM

Re: IDIDIT Steering Column's Always Free shipping and on sale!
 
Happy Thanksgiving to all and thank you very much for the business from all of us at MCB!

We look forward to continuing to bring you all great deals on just about every brand out there!


All times are GMT -4. The time now is 01:31 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com