55-59 Misc Truck parts
 

CAB IS SOLD

55-66 rear stepside fenders L & R, GOOD FOR PATCH PANELS ONLY or making inner tubs for big tires. - LOCAL FREE ONLY GONE

55-56 Hood - decent usable condition - $100
58-59 Hood - Decent condition, small rust on upper corners. - $75

COMPLETE 1957 ROLLER 3600 Chassis, rearend, suspension, non cut up frame. $500 or offer.

Most of these parts came off the 57 Chevy 3600 - this is what I have left: UPDATED 3-23-16

Complete brake master cyl - $40
2 piece drive shaft w/ center support - came from a 235 with manual 4spd - $50
Interior window cranks - $10 Pair - SOLD
Interior door handles - $10 pair - SOLD
Exterior door handles - $10 pair -SOLD
Kick Panels and Vents -$40 all
Battery tray - $10
3600 1 piece Fender Emblems - $40 pair
57 Hood emblem - $30 - SOLD
Door glass - used $40 all SOLD
Wing Window Assemblies with Glass - $80 pair SOLD
Rear Small Glass - $40 SOLD
Heater core /fan assembly - $50
55-59 V Gauge Assembly complete - $75


Send me an email via PM for more pics on any of the items.

Re: 55-59 Misc Truck parts
 

Some more pics

COMPLETE rolling chassis 3/4 ton suspension long bed 6 cyl 4 speed setup. $500 Takes it all!!!!!

Re: 55-59 Misc Truck parts
 

I need a few misc parts and would prefer them to have some age since the rest of the pick up does (hence not buying them new). My pick up is a '59 Chevy 3100

I need:
inside window crank
inside door crank
driver side window frame sheet metal and hardware
horn button
original style rear tail lights
driver side window glass (shipping may not make this feasible).

Thanks,

Jeff

Re: 55-59 Misc Truck parts
 

Got the BOLD parts - you want both sides?

Not sure what the sheet metal frame is????
Yes - Glass would be too costly to pack and ship reasonably.

Re: 55-59 Misc Truck parts
 

I don't need both sides for the window and door crank but if you want to sell in a set I'll buy both. Below is a picture of my door frame missing the window channel piece.

http://i549.photobucket.com/albums/i...oads/image.jpg
Posted via Mobile Device

Re: 55-59 Misc Truck parts
 

Do you have the upper windshield channel for a 55 2nd series? I'm not sure if I'm calling it it correct thing, its the piece that the windshield sits in, where the roof and headliner meet, it goes from A-pillar to A-pillar as well.

Re: 55-59 Misc Truck parts
 

YEs its connected to the cab.... What do you want to pay for it?

Re: 55-59 Misc Truck parts
 

If it doesn't have a any holes rusted through it, and is otherwise complete, I could do $100 for that piece, what do you think? Do you have any photos?

Re: 55-59 Misc Truck parts
 

Here are a couple of pictures. Its the piece that attaches on either end to each A pillar, and attaches up top to the roof, an on the bottom it attaches to the inner roof panel.

Re: 55-59 Misc Truck parts
 

Sorry John the Cab was just sold. Going to be a whole new truck.... someday!

Re: 55-59 Misc Truck parts
 

got any pics of that 57 hood emblem?

shipped to 57106

Re: 55-59 Misc Truck parts
 

Baja Bob - pics of clutch parts

Outside arm, pedal, shaft, inside mount, lever, connector rod (not shown) all included for $50 shipped.

Sorry for the lousy pics

Re: 55-59 Misc Truck parts
 

PTC
Sounds good, I am in. Advise on Paypal ??

Re: 55-59 Misc Truck parts
 

pm sent

Re: 55-59 Misc Truck parts
 

Sorry I feel of the planet a bit had found a set locally long story short he sold out from under me so as long as the mounting studs are on it and in good condition and its not covered in pits I think I will take it

pm me for paypal or however you want to do that jazz

Re: 55-59 Misc Truck parts
 

No sorry for the confusion just the hood emblem it would be the same size for the 3100 correct or have I been misinformed?

Re: 55-59 Misc Truck parts
 

any word? Haven't heard from you in a while here hope everything is okay

Re: 55-59 Misc Truck parts
 

Parts came today, thanks and nice doin business.

Re: 55-59 Misc Truck parts
 

Thanks Bob sorry for all the delays, hope that fits all your needs! enjoy

Re: 55-59 Misc Truck parts
 

Here ya go.... sorry been chasing my tail for too many projects going on and then they throw turkey on top of it all....

Good condition, will shine up with some serious polishing but not to SHOW style. perfect for patina look type truck. All the mounts are good, none broken.

Re: 55-59 Misc Truck parts
 

I sent a pm on the hood emblem

Are those lower marker light assemblies (clear ones) going up for sale as well as the headlight buckets? Interior door handles and window cranks?

I wouldn't need the headlight bezels if you need to sell the assemblies though I could also do that

Re: 55-59 Misc Truck parts
 

Ill have to check on the marker lights, they may be gone. The buckets and headlights are gone, still have bezels! ... lol and the interior handles and cranks. will send you a pm on everything.

Re: 55-59 Misc Truck parts
 

Ok I have a few more items that have been removed from the truck.

Wing Window Assemblies - perfect for patina trucks, $80 for the pair. SOLD
Door latches and cranks. latches all good, 1 bad crank shaft - $60 for the set
Front bumper mounts - $10 pair
Window Regulator - $70 pair

Re: 55-59 Misc Truck parts
 

sent you a PM.

Tod

Re: 55-59 Misc Truck parts
 

Send it again Tod, I didnt see what you needed.