The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Electrical (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=64)
-   -   66 C10 Battery Cables w/396 BBC (https://67-72chevytrucks.com/vboard/showthread.php?t=782701)

Afirehawk1 03-05-2019 02:11 PM
66 C10 Battery Cables w/396 BBC
 
Would like some input on this one.
I placed my 66/67 Chevelle BBC engine in my 66 C10.
Looking for a set of battery cables.
Thinking using the Chevelle cables in the truck but was concerned on the lengths being correct.

Any experience with a similar setup?

Thank for any input
Keith

vin63 03-05-2019 06:58 PM
Re: 66 C10 Battery Cables w/396 BBC
 
To take any guess work out of that issue, I make all of my battery cables from welding cable. Most welding suppliers also sell the appropriate sized terminals. It's also fun using the hammer lug crimper to take some frustrations out on.

Macdaddy1 03-05-2019 07:09 PM
Re: 66 C10 Battery Cables w/396 BBC
 
I went down to auto zone and bought the length of cable and the pellets that you heat up in the connector and melted my connections on and cut cable to desired length.

PGSigns 03-06-2019 07:53 AM
Re: 66 C10 Battery Cables w/396 BBC
 
If you want pre made cables I use an old extension cord with the ends cut off and run it along there I want it to go. Then measure that and get one close at the parts store that has the ends I want on it.
Jimmy

The Rocknrod 03-06-2019 07:59 AM
Re: 66 C10 Battery Cables w/396 BBC
 
Quote:
Originally Posted by PGSigns (Post 8480960)
If you want pre made cables I use an old extension cord with the ends cut off and run it along there I want it to go. Then measure that and get one close at the parts store that has the ends I want on it.
Jimmy
Now see I never thought of that, we learn something new every day here. I've been using an old role of 1/8" solder I've had laying around for twenty or more years.

kens65fb 03-06-2019 11:46 AM
Re: 66 C10 Battery Cables w/396 BBC
 
Quote:
Originally Posted by PGSigns (Post 8480960)
If you want pre made cables I use an old extension cord with the ends cut off and run it along there I want it to go. Then measure that and get one close at the parts store that has the ends I want on it.
Jimmy
Most of the cables I see are 4GA.
Is that heavy enough for a stock C-10, without air-conditioning or electric fan ??

chevy_mike 03-06-2019 11:53 AM
Re: 66 C10 Battery Cables w/396 BBC
 
Quote:
Originally Posted by kens65fb (Post 8481088)
Most of the cables I see are 4GA.
Is that heavy enough for a stock C-10, without air-conditioning or electric fan ??
Yes. Ideally the more strands the better but 4GA is fine. Make sure your ground strap is the same and connected to a good, clean spot on the engine block. Then run ground straps to the frame and body, if possible from the same spot on the block. Bad grounds are the #1 electrical issue that will cause so many of the most random issues people have.

kwmech 03-14-2019 11:05 AM
Re: 66 C10 Battery Cables w/396 BBC
 
I know I'm not a vendor but I've got a lot of bulk cable and ends if you need something custom made up to double 0


All times are GMT -4. The time now is 10:19 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com