My new toy
 

3" body and suspension lift...running 35-14.5-15 Super Swamper TSL's

Heres a pic of my truck no lift with 33x12.50 15's

:burnout: Here's Mine

Here is my 72 Cheyenne Super

Newest addition to my GMC family. http://i3.photobucket.com/albums/y56...i/Passside.jpg

My 70 Shortbed "WIKED"
 

A few pics of my 70 Shortbed "WIKED".

My 72
 

Finally located my photos.

update: white diamond pearl

1970 Chevy
 

Before the bigger tires and wheels, and before the matching camper shell.

Newer pic at: http://img.photobucket.com/albums/v2...d/0b608b87.jpg

my pride and joy, my '77 K20 that i inherited from my grandfather.
http://coloradok5.com/photos/data/50...8IMAG0001a.JPG
my undecided truck... :crazy:
http://coloradok5.com/photos/data/500/15098IMAG0075.JPG
and my daily beater- er, i mean driver. :burnout:
http://coloradok5.com/photos/data/500/15098IMAG0098.JPG

Here are a few of my 72 k-5 396

Recently acquired '72.

Fits through the door by about an inch. If I had clearance lights/cab roof lights ... it would hit. Door is right at 8 foot 3 inch, so the truck is right at 8 foot 2. Getting the Xover steering and shock mounts done in topeka this week. Hope to have it done in 2-3 weeks. Note: I am 6' 1"

Mine.....
 

Here's my daily driver....... 1993 K1500 Z-71

my 4X4
 

This is my daily driver...
'70 K20 402 BBC TH350

She's squatting a little because there is 2947lbs of African Wood in the back.

http://i5.photobucket.com/albums/y18...oadedtruck.jpg
http://i5.photobucket.com/albums/y18...7lbsofwood.jpg

Here is my 89 stepside!

31x10,5 on 15x10 rims and the truck is not lifted!

Stocker
 

Pretty much all original, cept for lift kit. I'm the second owner and bought with only 8,600 miles on it. Few mods planned but nothing crazy.

here is my before and current pic. I have a 4" suspension lift and just added a 2" body lift with all new body mounds so actualy added 3". The body and Paint should be completed by summer.

The Punisher
 

Here is the pics of my beast. Hope everyone likes. Here is my websight with some more pics I will keep it updated whenever I add something new. But with finances and gas prices it may be a slow trasition.

http://www.cardomain.com/memberpage/833690

heres mine!

'89 K5. 8" Kit 35" Boggers, All New Sheetmetal And Paint In 2003
THE LAST PICTURE IS MY NEXT PROJECT....'86 GMC SHORTBED 350 CI.PLANS ARE 3/4 TON RUNNING GEAR 4.10'S 6" KIT WITH 33"X15.50X16.5 SUPER SWAMPER SX'S ON 16.5X12 WELD STONECRUSHERS. PAINT....GUNMETAL GRAY WITH RED FLAMES.

Well...this technically isn't a 4X4, but it is a 6X4! I designed the frame/roll-cage and helped to fabricate and build many aspects. I couldn't resist!

Where are the 60-66 4X4s?

http://img.photobucket.com/albums/v6...PanelNAPCO.jpg

Bob

Thanks! It's a 65 GMC 1 Ton Panel Truck with a NAPCO 4X4 conversion. The wheelbase is 133 inches and the GVW is 8800 lbs. The drivetrain is a 305E V-6, SM-420 with PTO, NAPCO (Rockwell) Transfer Case, H-072 rear axle and a NAPCO (FH-035) front axle which uses the same parts as the Eaton rear axle. The winch is a Ramsey 200R and is driven by the PTO on the transmission. It is mounted using the Ramsey kit that was available as a dealer-installed option.

More pics

Bob

Try this one more time...