WTB Need lower clutch rod
1 Attachment(s)
Finally putting together some of the last pieces of my 65 project only to find out I have the wrong clutch fork push rod. See pic below of the part I need (not the z bar, just the rod).
If any one has one please post pic & price shipping to 08753. Really appreciate any help on this part. Thanks Scott |
Re: WTB Need lower clutch rod
Scott I will look tonight. I just pulled the entire setup off a GMC that I am parting.
Jimmy |
Re: WTB Need lower clutch rod
Thanks Jimmy
|
Re: WTB Need lower clutch rod
Scott I have a couple in a box and do you have a length to make sure I have the correct one?
Jimmy |
Re: WTB Need lower clutch rod
Jimmy, part of my problem is I'm not sure of the length. When I got the 65 a PO had installed a V8 in the forward position. He then modified (that's being nice, hacked is more like it) the clutch linkage, floor, etc. to work in the wrong position. I put the engine in the rear position where its supposed to be.
Long story short the rod that was in the truck is now way too short. I did a quick measurement & a best guess is around 12" (give or take) should work. Sorry 4 the long explanation, hope that helps. Thanks Scott |
Re: WTB Need lower clutch rod
I should have it. I have 4 in the box and will get pictures of the best one They are all stock stuff.
Jimmy |
Re: WTB Need lower clutch rod
still looking
|
Re: WTB Need lower clutch rod
Scott I have another one. Just got real busy and forgot to text you back. Will get you pictures in the morning.
Jimmy |
All times are GMT -4. The time now is 07:33 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com