s10 v8
 

well this will be a first, ima start a project thread. ive been working on a 92 s10 for the past couple months working on the intirior and getting the stock 4.3 out and im almost half way done, im putting in a stock 350 matbe gunna do some work on that and post pics later but this is what i got so far for pics on how far ive gotten.. if anyones got any opinions or advise help lol, ill get pics up once i figure out how:bann:

Re: s10 v8
 

hers a few from when i first started

Re: s10 v8
 

i hate how you can only upload 5 at a time :waah:

Re: s10 v8
 

heres the last ones from how it was when i first started on this

Re: s10 v8
 

this was the second month in and it dont look to pretty under everything lol ill try to get some pics of how it is soon i havent been able to work on it lately cause i have to wait for my dad to be off of work for once to help me out with taking out the engine, were gunna stick to the fuel injected which leaves me with another question, my dad keeps saying all we need to change is the computer for the 350 and be able to re-use the wire harness but i looked at all the connections and i think we would have to get a new wire harness so if anyone knows anything about either sides of that could you help me please?

Re: s10 v8
 

Wow Minnesota trucks look alot like New England trucks!

Re: s10 v8
 

I once did a swap on an early 90's full size. It originally had a 4.3 and we swapped in a 5.0. If I recall correctly, the computer was a direct plug-in, some of the sensor wires had to be extended. I think that was it. I did this swap approximately 10 yrs ago. So there may be some things I have forgot. If I am incorrect I'm sure someone here will correct me.

There is also an s-10 section on here. You may want to check it out, you might find your answers there.

Oh yeah, Welcome to the board!!!!!!!!!
Jason
Posted via Mobile Device

Re: s10 v8
 

subscribed! good luck,, I want to do this very swap to a 91 blazer..

Re: s10 v8
 

ybnorml- thanks alot :) your the first one to say welcome lol and did you have to get a new computer for yours?
75chevyguy- ive always wonderd what trucks across the ocean looked like i always thought most ppl would bike around cuz last i heard gas was almost $8 there
waybad- thanks this is my first time and im doing it for a present for my dad, hes had this truck a good 10 years and its just been sitting cause hes been to busy with other things and he was ready to give up on it but i like it to much to see that happen, where i am i almost never see this model s10 this over built :) btw how do i have spesific replys? where it takes what the person said then puts your post right under theirs

Re: s10 v8
 

ok i figured it out btw would i have to repost this on the s10 one or would i be able to keep it on here?

Re: s10 v8
 

alright here is how it sits as of now, ive been looking into body swaps and if i can get enough notes i might swap out the body with a 58' apache, that would be the **** haha :devil: im pumped on taking the motor out i have the wire harness marked pics from when i was taking it off on my phone and ill post those if anyones interested...right now im working on getting the garage cleaned up so ill be able to move the engine hoist around the only thing that sucks is that i have to repair the floor pans before ill be able to start the motor because the two front cab mounts are completely rusted out im just going to shape some sheet metal then i have some steel squared tubing that im going to use for the mounts on the floor so nothing pretty but will work for now because either way i plan on getting a new body for it. one thing i have observed from our 84 blazer is that the 350 in it really torques the body so ill have to do really good work on the cab mounts so they dont snap when i start it

Re: s10 v8
 

[quote=hipasschev94;4963225]alright here is how it sits as of now, ive been looking into body swaps and if i can get enough notes i might swap out the body with a 58' apache, that would be the **** haha :devil: im pumped on taking the motor out i have the wire harness marked pics from when i was taking it off on my phone and ill post those if anyones interested...


that is exactly my plan only on a 55 2nd 3100 series short bed..:metal:

Re: s10 v8
 

[quote=waybad;4963646]nice, do you got a build thread so i can check it out?

Re: s10 v8
 

[quote=hipasschev94;4965491]no not yet ,, still driving the 55,
I have to get my ls1 vega finished before i do the 55

Re: s10 v8
 

i cant wait, i have the tranny hoisted and im finaly going to be able to pull the engine this weekand:) this is taking to long though..

Re: s10 v8
 

[quote=waybad;4965839]you gotta let me know when you start a build thread if you do, id love to see that come together

Re: s10 v8
 

havent been able to get much done lately between school and helping the my girl around the house but i gave up on the doors that i was going to use because they wouldnt work right plus they were already rusted bad from sitting on the ground outs side for a few years so started putting the old door back together and apperintly when my dad and his buddy moved all my stuff to fix the garage door they lost my clips, rod, and bolt for mounting the inside handle!!:cuss::smoke:atleast i dont need any of that right at the moment.. got the door put back on and it lines up, just cant shut it or else there is no way of opening it lol

Re: s10 v8
 

[quote=hipasschev94;4970054]will do for sure!

Re: s10 v8
 

somehow i forgot to post the pics last time :dohh: haha sorry well here they are

Re: s10 v8
 

how can i move this thread? i want to move it to the 4x4 projects and build but idk how could someone help please

Re: s10 v8
 

its going to be awhile till i can update on this, had to change my prioritys,im working on building a paint booth then getting the garage cleaned up so i can bring in my 78 to work on before snow flys.. sorry :no::smoke:

Re: s10 v8
 

hang in there!

Re: s10 v8
 

well im using what im learning from my new job to my advantage and starting some body work on the s10. i still need to get more coarse sand paper to do more but im going to patch up this little part in a effort to save the whole box, all i did was poke out all the rust spots so i have a rough idea of what i need to fix

Re: s10 v8
 

my game plan for the rest of the week is sand down on spare doors we were going to use before the bottoms rusted out and salvage all the sheet metal i can then start patching up the fenders and what else i can with that

Re: s10 v8
 

would it be possible to take off the outer fender while leaving the wheel well on the truck?