The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Wheel Question for 72 C10 (https://67-72chevytrucks.com/vboard/showthread.php?t=779334)

cgster 01-11-2019 03:45 PM

Wheel Question for 72 C10
 
1 Attachment(s)
Anyone know if a Ridler 645 wheel will fit a stock setup 72 C10 correctly?

Wheel size 20x8.5
bolt 5x5
Hub 83.82
Backspacing 4.75
Offset 0

Thanks.

p0508 01-11-2019 11:27 PM

Re: Wheel Question for 72 C10
 
You shouldnt have an issue with these wheels. I'm running 15x10 on a 4.5 backspace and had to clearance my tie rod end a bit. With a 20 inch wheel you should have plenty of clearance for anything that might even be close to in the way.

Remember, the higher backspace number the further the inside edge of the wheel will be to the chassis/frame. With a 17inch and larger wheel i believe you can run up to a 5.5 backspace before running into issues. The only thing you may see is the wheel contacting your control up before full lock, other then that you will probably be fine.


All times are GMT -4. The time now is 09:55 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com