1960-62 torsion bar rear mount pads
 

anybody know where I can pick up frame mounts for the rear torsion bar cross member 1960 to 1962 don't show them listed anywhere i'm sure there is a cross-referenced part circular busshings 1 1/2" across 1/2" thick

Re: 1960-62 torsion bar rear mount pads
 

no one had any any suggestions so here is what I ended up doing.
Milled this piece around the top to fit in the 3/4" hole in the frame and cut it in half total cost $6.35 hope it helps someone else.