The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Bolts for aux springs (https://67-72chevytrucks.com/vboard/showthread.php?t=733179)

kenn 03-19-2017 11:31 AM

Bolts for aux springs
 
Hello all
I bought a set of aux springs for my 72 off the site and they did not come with bolts. Can someone tell me the size of the bolts that go to the frame please.
Thanks K.E.N.

kwmech 03-19-2017 12:37 PM

Re: Bolts for aux springs
 
What type of auxillary spring

kenn 03-19-2017 12:47 PM

Re: Bolts for aux springs
 
overload springs under the bed that are bolted to the frame.
I have a long bed with coils and I will be making a long trip in the future. Thought that the extra springs couldn't hurt so I bought them off the board a while back and was going to install them this week. The bolts were not included in the sale.

Bigdav160 03-19-2017 12:49 PM

Re: Bolts for aux springs
 
That's because, IIRC, they were originally riveted to the frame.

Find the best fitting grade 8 bolts you can buy.

kenn 03-19-2017 01:30 PM

Re: Bolts for aux springs
 
Thanks

FirstOwner69 03-19-2017 05:15 PM

Re: Bolts for aux springs
 
2 Attachment(s)
They ARE bolted to the frame. At least those on my '69 have been since day one. I think the bolts are 1/2" diameter by about 1-1/2". I can't verify the size... at least for a few weeks.

68 c20 cst 03-19-2017 05:56 PM

Re: Bolts for aux springs
 
I have those. I just took then off I'll check the sizes in a couple of hours.

kenn 03-19-2017 07:54 PM

Re: Bolts for aux springs
 
Thanks again for the help. K.E.N.

68 c20 cst 03-20-2017 07:40 AM

Re: Bolts for aux springs
 
1 Attachment(s)
They are 1/2" bolts. 3 are 1/2" x 1-1/4" and 1 is 1/2" x 1-1/2" with a thick washer. Here is a picture

kenn 03-20-2017 02:10 PM

Re: Bolts for aux springs
 
I'll bet the bottom two are 1/2" also.
Thanks to all.
K.E.N.


All times are GMT -4. The time now is 11:44 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com