Re: 1978 big ten build
Quote:
|
Re: 1978 big ten build
1 Attachment(s)
well that what i get for buying the cheap autozone handles
Attachment 1000488 |
Re: 1978 big ten build
Your arms are just stronger than where they were made. Junk for sure.
|
Re: 1978 big ten build
You are stronger than a Chinaman :sumo:
|
Re: 1978 big ten build
Had a rough day today. Transmission went out. On the way home didn't shut the hood hard enough like a dumb a** hood flew up broke the hinges. Yep today was a bad day.
Posted via Mobile Device |
Re: 1978 big ten build
Been a while since I posted. Going to pull engine and tranny over the thanksgiving break and rebuild the trans and fix all oil leaks on motor also replace the lifters and cam. Finally finishing up all the interior hopefully getting carpet in the next couple of weeks and new back window. Things are looking up!
Posted via Mobile Device |
Re: 1978 big ten build
4 Attachment(s)
started working on the trans this week. friction plates were toast..got the rebuild kit torque converter and stage 1 shift kit from rockauto.
Attachment 1015764 Attachment 1015765 Attachment 1015766 Attachment 1015767 |
Re: 1978 big ten build
1 Attachment(s)
Also got a cool picture when i was broke down at my fishing spot. starter went out. this was right before the tranny went out.
Attachment 1015769 |
Re: 1978 big ten build
Cool build! Sorry about all this bad luck though.
|
Re: 1978 big ten build
Quote:
|
Re: 1978 big ten build
half way done with the trans rebuild. this trans was rebuilt at some point and who ever did it was not the smartest gearhead out there..... the 1-2 accumulator spring was broken and he just put it back in.. on the modulator valve he didnt put the spring back on. over tightened everything to the point is mashed up the parts. also spent today getting the bushing kit and the lip seal tools also got the control valve assembly cleaned which took at least an hour just to clean it was full of friction plate goop. and got the shift kit springs installed. tomorow ill be installing new bushings, seals and starting the re assemble process.
|
Re: 1978 big ten build
the trans is almost done come to find out the po took the 2-3 accumulator spring out. iv heard of people doing this and shimming it to make the shift crisper but this wasnt shimmed. so ill head to a local trans shop and see if they have a spring if not then ill have to go and order one off the internet.
|
Re: 1978 big ten build
trans has been in the truck since last week, shes shifting good. replacing the cam,lifters,push rods next weekend. next week will be a busy one, ill be graduating high school and getting started enlisting in the the USMC.
|
Re: 1978 big ten build
Instead of buying the comp cam and lifters I decided to just replace the lifters and push rods. And save for a crate engine.
Posted via Mobile Device |
Re: 1978 big ten build
3 Attachment(s)
Got some snow today!
Merry christmas everyone!! Attachment 1031161 Attachment 1031162 Attachment 1031163 |
Re: 1978 big ten build
Nice suppose to snow tonight here....back to work tomorrow in the stang ugh
|
Re: 1978 big ten build
bummer man!!
|
Re: 1978 big ten build
Got about an inch out here. Boy do I love driving in the ice spinning around!
|
Re: 1978 big ten build
Quote:
Posted via Mobile Device |
Re: 1978 big ten build
It was 70 degrees here with no clouds most of the day, a cold front blew in a little while ago and its down to 40 or so now...
|
Re: 1978 big ten build
Quote:
|
Re: 1978 big ten build
Lookks congested where you park, a bit of everything. It is -25 here right now with about 1ft plus of snow, but not to slippery.:lol:
|
Re: 1978 big ten build
It'll be awhile for snow here.
|
Re: 1978 big ten build
finally broke down and bought a stero system. a kenwood kdc-152, a pair of 6 1/2 2 way speakers, 400 watt dual amp, 2 boxed 8in subs, and a pair of 6x9 duals. im wanting to build a console on the trans hump. that will hold the 6 1/2, my tach and temp gauge. has anyone ever done this? id like to see pics if you have them.
|
Re: 1978 big ten build
5 Attachment(s)
Attachment 1035796
Attachment 1035797 Attachment 1035798 Attachment 1035799 Attachment 1035800 finished the sub box today. |
All times are GMT -4. The time now is 03:26 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com