The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)
-   -   frame specs (https://67-72chevytrucks.com/vboard/showthread.php?t=396921)

thxbug 04-11-2010 01:00 PM

frame specs
 
I have searched on here and cant find them. Does anybody know where to find the factory frame specs for a 70 k5 2wd.

N2TRUX 04-12-2010 09:59 AM

Re: frame specs
 
Anyone?

Keith Seymore 04-12-2010 11:53 AM

Re: frame specs
 
Are you talking dimensions, or material properties, or engineering usages, or what kind of specs are you talking?

K

thxbug 04-12-2010 11:52 PM

Re: frame specs
 
im talking about the exact measurements and dimensions of the chassis so i can build one. I thought i saw it on here before but i cant find it

Twisted78SS 04-12-2010 11:57 PM

Re: frame specs
 
I think I have it, hang on..

Twisted78SS 04-13-2010 12:03 AM

Re: frame specs
 
Check this thread

http://67-72chevytrucks.com/vboard/s...d.php?t=376773

http://67-72chevytrucks.com/vboard/a...1&d=1262756109

thxbug 04-15-2010 11:20 PM

Re: frame specs
 
thanks for sharing the info man thats a big help

dfairchild19 04-22-2010 10:43 AM

Re: frame specs
 
hey twisted, happen to have those specs for a 71 lwb 4x4?
thanks

Twisted78SS 04-23-2010 01:15 PM

Re: frame specs
 
How about this, a very good site for info... be sure to take a look as there is a table that lists the measurements.

http://www.chuckschevytruckpages.com/framespecs.html

Chevy / GMC C/K Frame Dimensions

Hopefully, these Chevy / GMC pickup truck frame dimensions will help those of you that have been requesting this info, as well as others. Frame dimensions are helpful, and a necessity when considering possible custom body swaps. Also handy for dump beds, and tilt noses. The oval shaped holes in the chassis are gauge holes. Pins can be inserted, and then measurements can be taken from these pins to verify that a frame is not bent or twisted.
Updated 4-30-03

http://www.chuckschevytruckpages.com/images/frame.gif

Here's the top view....
http://www.chuckschevytruckpages.com/images/frame2.gif


Chevrolet used 39,000 PSI Carbon Steel to make all 10, 20, & 30series frames.*

Pasted from <http://www.chuckschevytruckpages.com/framespecs.html>

dfairchild19 04-23-2010 01:29 PM

Re: frame specs
 
thanks twisted

swamp rat 12-07-2010 01:53 AM

Re: frame specs
 
Quote:

Originally Posted by thxbug (Post 3913662)
I have searched on here and cant find them. Does anybody know where to find the factory frame specs for a 70 k5 2wd.


scroling back is all i have seen on this forum so far, not to say its not posted somwhere.

Twisted78SS 12-07-2010 01:10 PM

Re: frame specs
 
Here is another thread that has some frame spec pics.
http://67-72chevytrucks.com/vboard/s...d.php?t=376773



Plus I added the pics to my ever growing resource online here. http://www.2heeldrive.com/Chevrolet/


All times are GMT -4. The time now is 07:31 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com