WTB 32 spline input shaft/gear for 241 t case
 

Looking for a 32 spline input shaft/gear for a 241 transfer case and adapter for turbo 400. Someones gotta have one for a decent price

Thank you

i have the front 241 front shaft from a 89 k3500 it was hooked to a turbo 400 pm if interested

Still looking Anyone?
4x4k30 had one but is broken ,dont know how that would happen? lol but thanks for the reply

Re: WTB 32 spline input shaft/gear for 241 t case
 

I'm looking for one as well.

Re: WTB 32 spline input shaft/gear for 241 t case
 

One what since the OP 11 years ago was looking for the input and adapter?
Mods will growl at you for posting a WTB w/o upgrading.
My guess is the input is the same on a 4L trans which should enlarge the pool of years to look for. The 241 and 400 trans together were available for about 15 minutes. Rumor has it that the NP208 is like a 241 but w/o the oil pump, which might expand the gene pool. Late SM465s actually had 32 spline outputs so they might be a possibility.
I'd go to www.pirate4x4.com and look in their classifieds, but watch out, they're mean...

Re: WTB 32 spline input shaft/gear for 241 t case
 

Yeah I know about the growl- this is the ONLY site that has this requirement. And I figured I would slip this in as the OP most likely sourced his part. I'm just looking for the input- going from a 700r 27 spline to a 4l80e 32 spline and collecting parts gradually - with my year 1989 there seems to be a tooth style change in the planetary in 1995, so I'm looking for up to 1994 otherwise the scope would be wide open.

I really don't care for Pirate- there are definite nuggets in that forum, but I usually come out feeling pissed off.