How do I know If my Frame is Twisted or Bent??
I took the bed off my lwb and I am planning on cutting the frame and making it into a nice short box truck... but after looking at the back two supports connecting the frame rails together they do not measure square..? is this correct? it just doesn't seem right..
does anyone know a good and accurate way to check if a '67 frame is straight? |
Re: How do I know If my Frame is Twisted or Bent??
If there's no obstructions, you can measure the frame in an X-pattern...ie: Left front to Right rear, and Right front to Left rear. Measure at same points and see if there's any difference.
|
Re: How do I know If my Frame is Twisted or Bent??
The 2nd crossmember in by the hard bar mount it mounted at an angle, this may be throwing you off .
|
Re: How do I know If my Frame is Twisted or Bent??
is the right side higher than the left side my frame is twisted i noticed my bed is titling to one side got under it and found the frame at the rivets is spread
|
Re: How do I know If my Frame is Twisted or Bent??
1 Attachment(s)
It is normal for the support to be at an angle.
|
Re: How do I know If my Frame is Twisted or Bent??
There is a ton of information shared on this site. It would help if members would read what others have posted. Maybe you could answer your question before posting it.
If you have not purchased a "Factory Assembly Manual" and a "Factory Shop Manual", I strongly advise you to do so. This comment is not directed at smokenbarrels. As posted by FarmTruk and Slammed66, measure your frame diagonally. The 2nd from rear is mounted "non-square" and plays tricks on your eyes. You should not have a problem when you shorten your frame if you take care and double check and triple check your measurments before you cut. |
Re: How do I know If my Frame is Twisted or Bent??
Thanks guys, I was confused there for a min., yea that pan hard bar bracket is not straight..
I will be using a older thread illustraiting how to shorten the frame.. it looked very detailed. |
Re: How do I know If my Frame is Twisted or Bent??
Here are some typical frame specs to use to see if it is twisted.
http://www.chuckschevytruckpages.com/framespecs.html |
Re: How do I know If my Frame is Twisted or Bent??
:agree: Good info on that Linky :metal:
|
Re: How do I know If my Frame is Twisted or Bent??
Quote:
|
All times are GMT -4. The time now is 01:35 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com