The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Side trim removal (https://67-72chevytrucks.com/vboard/showthread.php?t=818249)

'65 chevy lover

02-10-2021 11:04 PM

Side trim removal

I have a '65 C10 pickup and need to remove the trim from doors and bed. How's the easiest way to do this? Thanks in advance for any help.

jayoldschool

02-11-2021 10:20 AM

Re: Side trim removal

You need to push up on the trim, perpendicular to the body, then you will be able to pull one edge off the clip. Looking at the bare clips will help to understand what has to happen.

bigmoe

02-11-2021 02:44 PM

Re: Side trim removal

The short pieces and the tip of the spear are held by nuts from behind.

'65 chevy lover

02-14-2021 03:21 AM

Re: Side trim removal

Thanks for the reply's!

jayoldschool

02-14-2021 11:28 AM

Re: Side trim removal

I should add that some of the thinner trim simply pulls out straight, the clips are like a spring.

bigmoe

02-14-2021 02:22 PM

Re: Side trim removal

Quote:

Originally Posted by jayoldschool (Post 8879982)

I should add that some of the thinner trim simply pulls out straight, the clips are like a spring.

And if you can push from behind that's better.

All times are GMT -4. The time now is 03:54 AM.