Let's play name that part, bolt, harness, screw....
 

I figure this could be a good learning opportunity. Let's post up parts and pieces and name the application. Here's one: where does this rubber piece attach?

Re: Let's play name that part, bolt, harness, screw....
 

Airconditioning housing for condensation drain?

Re: Let's play name that part, bolt, harness, screw....
 

a/c evaporator drain and spring clamp
old money

Re: Let's play name that part, bolt, harness, screw....
 

Yes! Often missing. Here's the attachment location.

Re: Let's play name that part, bolt, harness, screw....
 

Ok. Anyone familiar with these sheetmetal screws?

Re: Let's play name that part, bolt, harness, screw....
 

grounding strap screws

Re: Let's play name that part, bolt, harness, screw....
 

These are the body-side ground screws that I'm familiar with - not all used a star washer but that's just my experience. Here are examples including that for the ground for the AC harness at the condenser box and those at the rad support, which differ from that below: http://67-72chevytrucks.com/vboard/s...1&postcount=54

The longer sheet sheet metal screws above were used for two applications that I'm aware of.....

Re: Let's play name that part, bolt, harness, screw....
 

These are the screws used for the fan ground at the AC box and examples of those used for grounds at rad support. Replated in clear zinc.

Re: Let's play name that part, bolt, harness, screw....
 

Here's the screw used for the battery clamp on my blue 72 blazer - similar to rad support ground screws but longer.

Re: Let's play name that part, bolt, harness, screw....
 

Screws in post #5 are correct for mounting the console to floor pan and also used for some attachment points for AC and heater box - in cab side maybe?

Re: Let's play name that part, bolt, harness, screw....
 

Ok. What about these screws....anyone?

Re: Let's play name that part, bolt, harness, screw....
 

Here's a hint...Some Blazer and Jimmy guys will have these others will not.

Re: Let's play name that part, bolt, harness, screw....
 

Rear hatch screws?

Re: Let's play name that part, bolt, harness, screw....
 

Close! These are the top bolts for use on k5s w a single wall top. Not best example pic but shown below.

Re: Let's play name that part, bolt, harness, screw....
 

How about the application for these nuts?

Re: Let's play name that part, bolt, harness, screw....
 

Acorn nuts for West Coast Jr. mirrors.

Gary

Re: Let's play name that part, bolt, harness, screw....
 

Ditto

Re: Let's play name that part, bolt, harness, screw....
 

Yes! Camper mirrors and below eyeline. Did you know the threads are metric?

Re: Let's play name that part, bolt, harness, screw....
 

Here's an obscure part (set of 4) I received in a parts lot. I honestly don't know exactly where these go. Spacer for what the rear lamp lens?? Between screw and lens?

Re: Let's play name that part, bolt, harness, screw....
 

Parts tag...

Re: Let's play name that part, bolt, harness, screw....
 

Neat idea Deadhead. Here's something you don't see everyday.

Re: Let's play name that part, bolt, harness, screw....
 

If that's what I think it is I wish I had a 5 gallon bucket full of them. 72 c10 part 2 per vehicle

Re: Let's play name that part, bolt, harness, screw....
 

I'm thinking that is the gas tank vent tube for a 71-72 truck. Goes up the passenger side of the cab between the back of the seat, just behind the door jamb, where all the jack tools are missing.

Re: Let's play name that part, bolt, harness, screw....
 

Yep, right above the missing parts......"Vent pipe assembly".

Re: Let's play name that part, bolt, harness, screw....
 

What do you think they are???

Re: Let's play name that part, bolt, harness, screw....
 

Thanks for posting!

Re: Let's play name that part, bolt, harness, screw....
 

Are those spacers for the 72 only doors? The screw below the vent window.

Re: Let's play name that part, bolt, harness, screw....
 

No. Too short for door vent spacers.IDK what they are,but cant wait to find the answer!

Re: Let's play name that part, bolt, harness, screw....
 

Subject came up 1/2 a year ago. Was a nice lead by the 67-72 encyclopedia. Pretty sure Deadhead knows, so he can't participate.:HA!

Re: Let's play name that part, bolt, harness, screw....
 

Are those spacers for taillight bezel screws. Two lower on both sides.

Re: Let's play name that part, bolt, harness, screw....
 

Come to think of it, seems there is a similar for the rear bezel screws. Might be a #8?.......................I don't know, maybe close, but they're called?

Re: Let's play name that part, bolt, harness, screw....
 

Parts manual says spacer for rear lamp - shape would conform to a screw. But where?? I wish these were spacers for the 72- only door panel screw. I'll confirm but shape doesn't seem right and I think there a wee bit too small. Anyone have a pic of another that illustrates location?

Re: Let's play name that part, bolt, harness, screw....
 

Okay okay......They're flush washers for the #10 screw on the 72 door panel. You can get 100 of them for cheap, and they're an exact fit. These are nickle plated brass. I don't know what the original materials were. .........https://www.amazon.com/Flush-Finishi...=flush+washers

Don't have them handy, but I believe the 1/4" version for the 71ish panels are chrome plated or stainless.

Re: Let's play name that part, bolt, harness, screw....
 

originals out of a 72.

Attachment 1715937

Re: Let's play name that part, bolt, harness, screw....
 

Those are for the bezels over the tailights 2 per side. How about these cotton pieces?

Re: Let's play name that part, bolt, harness, screw....
 

Weep hole plugs for tailight lens.

Re: Let's play name that part, bolt, harness, screw....
 

Vacuum gauge inline filter. Maybe on air gauge too.

Re: Let's play name that part, bolt, harness, screw....
 

How about these? 69 C10 CST we are working on has 7 of these. Thinking 71-72s might have a few more...

Re: Let's play name that part, bolt, harness, screw....
 

Correct Hard to find these still intact on front or rear lenses. Luckily I still have replacements

Re: Let's play name that part, bolt, harness, screw....
 

Fuel tank attachments