67-72 Chev Crewcab Build
 

Starting it back up. Working a 67-72 Chev Crewcab built to an original look if Chev would have built a 67-72 Crewcab. Keep following as I continue this build.

http://www.rtechfabrications.com/siteimages/home.jpg

Re: 67-72 Chev Crewcab Build
 

Looks great! I can't wait to see pics of the 4th door coming together.

Re: 67-72 Chev Crewcab Build
 

Following along.
I see you are a new GOLD VENDOR!
Thanks for choosing to support this great forum.

Re: 67-72 Chev Crewcab Build
 

In for this.... going to look good!

Re: 67-72 Chev Crewcab Build
 

Looking forward to more pictures....:).

Re: 67-72 Chev Crewcab Build
 

Watching and waiting to see you do your magic!!!

Re: 67-72 Chev Crewcab Build
 

im here again. so now that you are a vendor are you alowed to sell? I AM NOT ASKING TO BUY I AM JUST ASKING SO YOU WONT GET SHUT DOWN AGAIN.

Re: 67-72 Chev Crewcab Build
 

Can't wait to see more progress pics, this truck is going to be awesome. One day I will have on too.
Posted via Mobile Device

Re: 67-72 Chev Crewcab Build
 

Hey guys had a 68 caddy come in with trunk rot going to be sharing the shop with the crewcab project, will be bouncing back and forth. Watching my adhd wreek havoc. I might put up some pics of the caddy project also if you guys get a chance check out my website. Gonna be taking alot of pics of the 4th door, I feel its one of the easiest parts of the job especially after the B pillar. I know the pictures don't tell the entire truth but my B pillar is an exact mirror image of the passenger side without the overlap seam.

Re: 67-72 Chev Crewcab Build
 

Definitely checking out your site... :)

Can't wait to see pics of the b pillar.

Re: 67-72 Chev Crewcab Build
 

Wow....sweet !

Re: 67-72 Chev Crewcab Build
 

The cabs that you sell I assume would be to the same "factory" design?

Re: 67-72 Chev Crewcab Build
 

Define "factory"
Posted via Mobile Device

Re: 67-72 Chev Crewcab Build
 

Welcome back! I was bummed on that last one.

Re: 67-72 Chev Crewcab Build
 

It sounds like he may have not read your first post when you said
"it will look built to an original look if Chevy would have built a 67-72 Crewcab"
to me that would be as he put it "Factory" Design. So it sound like you both are on the same page.

More pictures. :chevy::metal:

Re: 67-72 Chev Crewcab Build
 

Ok, hope you all had a great Christmas, I know we did. Before I get started talking about the build, for all you fabricators like myself you will be able to appreciate my new organization skills, ie my new fabrications cart.
https://fbcdn-sphotos-a.akamaihd.net...40988190_n.jpg


Well the caddy ended up being pandora's box but I'm close to finishing, I've been very excited about starting the door so I took a break from the caddy for a day to work on the 4th door. If you'll notice the front door to the left and the right rear door to the right, there is such a difference between the two that I will not be using a front left door to make the rear left door except for the door latch. Also showing a picture of the cut out from the 3rd door hinge area I will be completely fabricating a mirror image of what you see however it will be using a thicker sheet metal for more strength. Will be making a couple other improvements though nothing you would ever know by looking at it. For those you with a weak stomach I'm sorry you had to see perfectly good 3rd door cut up but it is for better of all crew cab kind.

https://fbcdn-sphotos-a.akamaihd.net...33132596_n.jpg
https://fbcdn-sphotos-a.akamaihd.net...53963768_n.jpg
https://fbcdn-sphotos-a.akamaihd.net...71440035_n.jpg
https://fbcdn-sphotos-a.akamaihd.net...40677736_n.jpg


Looking forward to difficulty of fabricating this door piece way more than doing the rest of the door, how weird is that? Also am just about ready to cut up the other suburban and I have two more on the way, the one I am currently cutting up had a nice interior will be using most of it on the crewcab. I talked to an upholster today for those of you who are familiar with the headliners that come in some of the trucks we are going to duplicate that head liner to fit the crewcab one piece.

Re: 67-72 Chev Crewcab Build
 

Can I copy this?!


It looks like you cut along the edge where the "lip" meets the door panel, right? I tried that on the rear of my 4th door and wasn't satisfied with my results. So I tried cutting along the top of the lip for the front section. I still wasn't satisfied... I think next time I will cut inwards .25"-.50" or so... I know the one seam will be hidden, but I still feel like I want to metal-finish it to look factory. Either way, it's been a LOT of finishing work. I feel what you are saying about all the fabrication of all the complex little differences!

Re: 67-72 Chev Crewcab Build
 

love the cart and cant wait to see what you do on the door !

Re: 67-72 Chev Crewcab Build
 

Did you Guys check out how Rokcrwln built his 4th door? It starts a post #51:

http://67-72chevytrucks.com/vboard/s...=188993&page=2
Posted via Mobile Device

Re: 67-72 Chev Crewcab Build
 

That's where I kept going when I would get stumped

Re: 67-72 Chev Crewcab Build
 

Just finished up the hardest part of the door. This is one piece of metal, no graphs anywhere, just heated, bent and shaped. Bolted it onto the B pillar and it fits like a glove. Really having a good time building this truck it is going to be my daily driver.

The suburban I am cutting up to be the next cab build is shaping up to be a very nice starting plat form, minimal rust and the dash is unmolested, still has factory radio in it. Just about to pull the original motor out and run the numbers to see what I have.

Have a question, and open to your opinions. On future cab builds I am thinking about making the rocker on both sides a continous piece from the back of the back door to the front of the front door and one gage thicker. Every cab I build the B pillars will be filled with rust resistant coating than drained as well as the rockers. Would love your input.



https://fbcdn-sphotos-a.akamaihd.net...06528827_n.jpg
https://fbcdn-sphotos-a.akamaihd.net...36856892_n.jpg
https://fbcdn-sphotos-a.akamaihd.net...50642562_n.jpg

Re: 67-72 Chev Crewcab Build
 

Beautiful work !

Re: 67-72 Chev Crewcab Build
 

If you have the means, I think the one-piece rocker would be a good idea. Are you planning on going a gauge thicker than stock, or thicker than reproduction? Are you going to carry the B-pillar down to the bottom of the rocker? Also, you have obviously noticed how the B-pillar is open to the elements from the drain in the inner rocker. I would love to see what you are doing with the rust preventative and sealing this off.

Re: 67-72 Chev Crewcab Build
 

Looking forward to seeing this project come together. Great work so far!!!

Re: 67-72 Chev Crewcab Build
 

Yes thicker, the long one pice rocker as well as the b piller will be treated and foam
Filled . The B piller will come down to the top of the rocker.