any 2 tone paint jobs on 67/68 sheetmetal
 

want to get some ideas and see some two tone paint jobs on 67/68 fronts , i have seen a couple ,want to see where people started the two tone at , and see what colors they used ,all the pics would be appreciated thx:metal:

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

Here's a few that I had on my computer. the last one is mine when I brought it home from Ga. I had the bed(s) full with all the other spare parts. ;)

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

I'm really digging the white roof on the 1st pic! :metal:

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

Ditto, that is SWEET!

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

Did you want custom paint jobs?The factory two-toned in two levels:Top accent color or top and below beltline moulding.

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

None are mine.

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

Looks like this answers the question of if the front grill area gets painted other then body color WITHOUT having the chrome trim going around the nose.

http://67-72chevytrucks.com/vboard/a...1&d=1243889631

I had been wondering if my '68 paint was factory done. Looks like if you got painted bumpers, you got a silver nose and if you got chrome bumpers and nose trim, you got white paint.

Sure wish mine had the trim.

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

Here's a '67 that is a one-owner that belongs to a guy I work with.

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

Here's a pic of my 68. I guess my bumper could have been changed, but the rest of the truck is original to the best of my knowledge. So who knows?

Sorry for the thread hijack!

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

Back on topic! Here's one I found on my hard drive.

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

that looks good , :metal:

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

heres a few im drawing inspiration from

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

Is that the original paint?

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

How about a few more.

http://i712.photobucket.com/albums/w...8/DCP_3031.jpg

http://i712.photobucket.com/albums/w...8/DCP_2595.jpg

http://i712.photobucket.com/albums/w...8/DCP_1624.jpg

http://i712.photobucket.com/albums/w...8/dcp_3515.jpg

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

The blue and white one is one of my favorites. Here's some of the 68 I just picked up.....

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

they look real nice with that bottom trim , but mine does not have it so i have to 2 tone up higher :waah:

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

I find it interesting that some of the white roof trucks have the front pillars painted white also and others just the roofs are white. I'm assuming all white (including front pillars) is factory, right?

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

Man,

That black red, silver, or black orange silver is HOT.

Im thinking two tone gloss/matt black with REAL copper trim/fire wall interior, or patina job for my 68

Bill

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

Thee A pillars were body color on 67's only. In 68 the whole top was white.

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

what wheel/tire size are you running? any drop?

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

215 70 15 on the fronts, 15.5 x 29 15s on the rear. Drop by heat torch, :(. I will be installing 2/4 dropped springs in the near future.....:D.

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

Heres my 68 burb green/white combo

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

heres my 68

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

nice i like that combo :metal:

Re: any 2 tone paint jobs on 67/68 sheetmetal
 

Thanks for the clarification John. I swore the body colored A pillars were a custom thing and not factory. I really think they nailed it in 67!

Here's a Bump for more pics for the original poster!